|
| ian12300 |
|
||
|
anyone here no how to make ef ford falcon diagnostic unit or have the wiring diagram
|
||
| Top | |
||
| GTBob |
|
|||
|
what do you want to diagnose
 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| Gaz |
|
||
|
well i got this rash right..
oh.. wrong forum
theres a tech doco witht hat pins u have to short/read here if you look up top left under tech docos
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| muzza |
|
|||
|
Hello, I will be making another batch in the next few weeks. Plugs into the Diag connector under the dash. Can select engine, transmission, ABS and Airbag. Codes are "read" by tone/lamp indicator. Am doing a set of instructions with codes this time as well. Just awaiting the connectors to come in from overseas. The unit will do EBII,ED,EF,EL (any of the big-white-connector-under-dash vehicles).
I have also made a version to do XF,EA,EB1 in the past as well. If any interest let me know... Last edited by muzza on Sun Sep 03, 2006 11:33 am, edited 1 time in total. |
|||
| Top | |
|||
| data_mine |
|
|||
|
Interested
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Mako |
|
||
|
Interested
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| GTBob |
|
|||
|
Definately interested
 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| joolz |
|
|||
|
A set of analogue multi meters does the same thing and tests volts, speakers on ohms x1 and so on.....
|
|||
| Top | |
|||
| JOSE |
|
|||
|
interested
_________________ Because i can. |
|||
| Top | |
|||
| mattronics |
|
||
Age: 46 Posts: 198 Joined: 3rd Mar 2005 Ride: NL FBT #079 Location: Melbourne - S.E. suburbs |
interested
|
||
| Top | |
||
| mr_sperm1 |
|
|||
|
interest here too
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
muzza wrote: Hello, I will be making another batch in the next few weeks. Plugs into the Diag connector under the dash. Can select engine, transmission, ABS and Airbag. Codes are "read" by tone/lamp indicator. Am doing a set of instructions with codes this time as well. Just awaiting the connectors to come in from overseas. The unit will do EBII,ED,EF,EL (any of the big-white-connector-under-dash vehicles).
These will be $89. Is your indicator a flashing light, or does it read out the codes? I take it the transmission test is only for EA's and V8's - essentially those fitted with a TCM ?
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| muzza |
|
|||
|
The unit plugs into the Diagnostic connector and has a Buzzer/Light for signalling the codes. It has a selector for choosing Engine (incl Trans on I6), Trans (V8 and some EB I6's), ABS and Airbag. Also has a Power and Fuel Pump indicator. It has a switch for initiating the test sequence.
Yeah, one could do the same with a multimeter.... main advantage of this unit is that you can just plug it in and Read and Clear codes easily.....i.e. convenience. I am also assembling a user guide incl code tables. Again, much of that info is already available on this site... I'm just packaging the info up in one convenient A5 sized booklet..... but using the Ford Workshop Manuals for sourcing the info. If one is used to using a meter or lamp, etc then fine..... I originally made one of these for myself and use it fairly frequently.... less fiddly. I had looked at making a unit to decode and present the codes on an LED or LCD display. Another option would be to send the codes to a Laptop or PDA using Hyperterminal. May do one just for the exercise. But I could not see people spending $300-ish on such a unit. Personnally, the simple little unit I made so far has served me well, and I trust, the guys who have bought them so far (have not heard any complaints). Anyway, enough rambling.... hope that clarifies. |
|||
| Top | |
|||
| arm79 |
|
|||
|
I purchased one of these units of muzza at least 3/4 years back.
Worth every cent. Strong, well designed and carefully built. Multimetres, leds and wires may be cheaper, but nothing beats the convenience of a plug in unit that just works with no hassle, and can test every service item in the car just by turning a knob and flicking a switch. I may be interested in a new one as well. My one is the original one with only 3 test options. |
|||
| Top | |
|||
| Nicko |
|
|||
|
I have one also
I will post a pic up for those interested very handy!
_________________ Nicko |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 8 guests |
