|
| edwagon |
|
||
|
Hi, was just wondering if anyone could please tell me the stud size and wheel offset of E-series Falcons. Its a simple question, but am unable to find a convincing or knowledgable person to answer.
Thanks |
||
| Top | |
||
| JOSE |
|
|||
|
PCD is 5*114.3, offset is +10mm, stud diameter is 1/2 inch,
length is different between EA-ED and EF upwards (they are 5mm longer), AU falcons have a different offset at +38mm
_________________ Because i can. |
|||
| Top | |
|||
| madmax |
|
|||
|
JOSE wrote: PCD is 5*114.3, offset is +10mm, stud diameter is 1/2 inch,
length is different between EA-ED and EF upwards (they are 5mm longer), AU falcons have a different offset at +38mm Can you put that in english for all the dumbf**ks like me out there?
_________________
|
|||
| Top | |
|||
| Interceptor |
|
||
|
PCD=pitch circle diameter, ie: draw a circle 114.3mm in diameter, and put a 1/2" hole every 72 degrees so there's 5 holes in total, it will fit straight onto a falcons wheel studs
_________________ Banned |
||
| Top | |
||
| madmax |
|
|||
|
Thanks for that.
No more learning today I've had my fill.
_________________
|
|||
| Top | |
|||
| djmikey |
|
||
|
So to be able to use Au onwards wheels in pre Au's you need to fit a 25mm hub adapter, increasing the +10 offset to +35 which is pretty close to the current offset.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
