Fordmods Logo

BEM/ICC Change 

 

Page 3 of 4 [ 56 posts ] Go to page Previous  1, 2, 3, 4  Next

 
 Post subject: Re: BEM/ICC Change
Posted: Fri Nov 12, 2010 10:48 pm 
Parts Gopher
Offline

Posts: 67

Joined: 3rd Feb 2007

Location: melbourne
VIC, Australia

just wondering whats the difference between all the icc units, ive got the standard one in a teri and ba, with the little screen with orange background lights
is there a standard one with blue background?
standard looking one with colour screen, not sure of background colour
another one has the fairmont look with non colour screen
and there must be a fairmont with colour screen
which ones take reversing and dvd input, do they take pc too?
thanks
is any better than the other
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Nov 13, 2010 1:28 am 
ACT Cruise Moderator
Offline
User avatar

Age: 43

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

onlinejamez wrote:
just wondering whats the difference between all the icc units, ive got the standard one in a teri and ba, with the little screen with orange background lights
is there a standard one with blue background?
standard looking one with colour screen, not sure of background colour
another one has the fairmont look with non colour screen
and there must be a fairmont with colour screen
which ones take reversing and dvd input, do they take pc too?
thanks
is any better than the other


There's a few different models of ICC.

essentially because it's compoentised, you can get combinations of...

single of 6 stacker CD
base screen, mid screen, high (colour) screen
manual a/c, auto climate control, dual zone auto climate control.
white, green, orange, blue lighting

some combinations aren't available, eg. with a 6 stacker you get the mid or colour screen.
dual zone climate control you get the colour screen only.

Only the colour screen, can have rear view and/or satnav added. To add dvd/pc to the colour screen you use the satnav input, it's a funny combination of NTSC RGB component video. You generally need a converter (or special video card) to feed it the right signal to work.

As for lighting, you got what matched the rest of the car. white for higher series, green for pov packs, orange in some territory models, and the blue only in XR's and FPV's.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Thu Apr 11, 2013 9:02 pm 
Oompa Loompa
Offline

Posts: 39

Joined: 16th Dec 2008

Location: Geraldton
WA, Australia

HI all
I am about to Install a Premium icc out of a 06 XR6 Sedan into a 06 XL ute...... Reading thought all the posts on the subject Is it correct if I DONOT disconnect the battery it wont need reprograming?
Or because I am upgrading it will have to be reprogramed?
I know I have to use the BEM and Remote sensor in the car is there anything else I need to do...
Thanks Barnzey

 

_________________

Fordz Rule

Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Fri Apr 26, 2013 12:53 am 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

IIRC FTG send their second hand units to ASL to have the security function removed before he sells them :)
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Thu Apr 09, 2015 8:28 am 
Fordmods Newbie
Offline

Age: 58

Posts: 1

Joined: 9th Apr 2015

Ride: BA Fairmont

Location: Melbourne
VIC, Australia

Hello Guys and Girls,
I purchased a Color Icc out of a Territory I believe and changed the BEM from my old unit which buy the way is in a BA Fairmont so premium sound to premium sound with color and yes I have to get it recoded, I phone ford dealership they tell me $150.00 but ringing around I found somewhere to do it for $60.00
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Aug 04, 2018 8:46 am 
Fordmods Newbie
Offline

Posts: 2

Joined: 10th Mar 2017

Ride: BA XR6 ute

Location: Hunter Valley
NSW, Australia

Sorry to drag up an old thread/topic which is been done to death but.............I'm in a similar situation as the OP. I have an 03 BA XR6 ute with the poverty pack single zone ICC. I picked up a BF Premium ICC yesterday and after reading this thread, would I be correct in saying that if I use the BEM from my current ICC and put it into the Premium ICC it should work??? Or is there a 50/50 chance I will need to get the radio coded? At this stage I'm not worried about not having the dual climate control, temp sensor or auto headlight function working. I can frustrate myself with that later!!
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Mon Sep 24, 2018 12:52 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

auxr6s1 wrote:
Sorry to drag up an old thread/topic which is been done to death but.............I'm in a similar situation as the OP. I have an 03 BA XR6 ute with the poverty pack single zone ICC. I picked up a BF Premium ICC yesterday and after reading this thread, would I be correct in saying that if I use the BEM from my current ICC and put it into the Premium ICC it should work??? Or is there a 50/50 chance I will need to get the radio coded? At this stage I'm not worried about not having the dual climate control, temp sensor or auto headlight function working. I can frustrate myself with that later!!


Yes you will need to get the ICC coded (unless it's unlocked). Using your original BEM will allow you to start and drive the car.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Wed Dec 26, 2018 8:00 pm 
Parts Gopher
Offline

Age: 55

Posts: 86

Joined: 3rd Mar 2006

Ride: EB GT fakey

Location: cairns
QLD, Australia

Hey all, apologies as above for bringing up an old thread, but i have a BA XR6 auto that I have the computer, ICC, and both ignition and door barrels in and am converting it to manual. I have a manual computer, ICC, barrels etc and want to know if i can swap the manual BCM into my dual zone ICC or do I need to find an up-spec ICC out of a manual? I am yet to swap my AC box over so have no AC atm and have the dash, wiring loom, rear bare (reverse sensors) out of the fairmont ghia and am hoping that swapping all this over will get me on the road again.

Any advice appreciated
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 8:19 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

Hey guys, just wondering if anyone could give me some advice I recently. Changed from the standard ICC to the premium in my Ford territory but the screen will not work at all. The person I bought it off swears that it works and even provided photo proof.

All the controls ie aircon, radio buttons just no screen at all.

Thank you to anyone who lends a hand
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 8:31 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

Savterritory wrote:
Hey guys, just wondering if anyone could give me some advice I recently. Changed from the standard ICC to the premium in my Ford territory but the screen will not work at all. The person I bought it off swears that it works and even provided photo proof.

All the controls ie aircon, radio buttons just no screen at all.

Thank you to anyone who lends a hand


Did you replace the complete unit, including the CD player?
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 9:14 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

[/quote]

Did you replace the complete unit, including the CD player?[/quote]

We retained the cd player from my ICC as they were both single cd units. Will that cause an issue? Mine looked in much better condition.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 9:29 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

Savterritory wrote:
We retained the cd player from my ICC as they were both single cd units. Will that cause an issue? Mine looked in much better condition.


Yes, the colour mono cd players are different even though the plugs fit the same. on the underside the mono screen cd player it will say LO, colour screen will say HI.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 9:35 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

Your a legend just tried it and the screen now comes on but I get a Security Code error message :( what's wrong now?
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 9:55 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

So reading the thread more thoroughly it seems I need a visit to Ford. What a shame.

The aircon isn't working either I assume that is apart of it all?

I have noticed a big black mark on the screen as well unfortunately so another issue I'll need to look into.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 10:20 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

So i managed to put it into test mode and all the buttons are working in reverse ie 6 is 1 etc.. I'm at a loss I think I'll put the standard one in and just leave it for now. I do really like I the idea of it though
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 3 of 4  [ 56 posts ]  Go to page Previous  1, 2, 3, 4  Next

Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 6:01 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names