Fordmods Logo

Home » Forums » Fordmods Tech » V8 Workshop

XE 5.4 Boss Project now starting. 

 

Page 1 of 2 [ 24 posts ] Go to page 1, 2  Next

Post New Topic Post Reply  Previous topic Next topic
 
mustang6
 Post subject: XE 5.4 Boss Project now starting.
Posted: Tue Jun 07, 2011 8:25 pm 
Stock as a Rock
Offline

Age: 37

Posts: 180

Joined: 24th Jan 2008

Gallery: 3 images

Ride: 1966 mustang

Location: brisbane
QLD, Australia
OK here we have an 82 XE falcon.
Will be getting a 5.4 quadcam engine fitted, as you can see its sitting in there at the moment and have around 5-10mm clearance each side.
Have plans for a single or twin turbo setup aswell and plan to run around 10psi.

I have 4 litres of the Green from d**k johnsons race car, well the same colour.
I have 20" Boyd Coddington wheels that will be going onto aswell.
Image
Image
Image
Image
Image
Image
Image
Image
Image

 

_________________

1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger.
330Rwhp @10psi.
Top
 Profile  
 
 
Benny D
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 07, 2011 8:31 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
cool. will be awsome wen its done. should go like fuk. 8-)

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
 
ToranaGuy
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 07, 2011 8:45 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia
Far out that is tight! Do you have engineer approval?

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|
Top
 Profile  
 
 
mustang6
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 07, 2011 8:50 pm 
Stock as a Rock
Offline

Age: 37

Posts: 180

Joined: 24th Jan 2008

Gallery: 3 images

Ride: 1966 mustang

Location: brisbane
QLD, Australia
ToranaGuy wrote:
Far out that is tight! Do you have engineer approval?

Cheers

ToranaGuy



Hi we dont have approval at the moment but once its all done i.e mounts are done im pretty sure it will pass pretty easily.

 

_________________

1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger.
330Rwhp @10psi.
Top
 Profile  
 
 
xcabbi
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 08, 2011 12:14 am 
Getting Side Ways
Offline

Age: 43

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia
Is that an ESP?
Top
 Profile  
 
 
Gab1
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 08, 2011 1:31 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1349

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia
Nice conversion, you may need to notch the shock towers, and fit RRS steering.

Gab
Top
 Profile  
 
 
ToranaGuy
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 08, 2011 7:25 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia
You will need 10mm clearance to pass engineering, which may need the towers massaged a tad. Get speaking with one before you get in too deep. It's money well spent.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|
Top
 Profile  
 
 
mustang6
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 08, 2011 9:45 pm 
Stock as a Rock
Offline

Age: 37

Posts: 180

Joined: 24th Jan 2008

Gallery: 3 images

Ride: 1966 mustang

Location: brisbane
QLD, Australia
ToranaGuy wrote:
You will need 10mm clearance to pass engineering, which may need the towers massaged a tad. Get speaking with one before you get in too deep. It's money well spent.

Cheers

ToranaGuy



Thanks for that, we plan on notching the towers a little so 10mm should be easy.
Had a look today and there is basically no room to go turbo so we are thinking of doing our first rear mount setup! Will see what happens might go good enough without a turbo.

 

_________________

1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger.
330Rwhp @10psi.
Top
 Profile  
 
 
bry40l
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 08, 2011 9:59 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
It will definatly go better than your average xe :D

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
ToranaGuy
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Thu Jun 09, 2011 12:33 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia
bry40l wrote:
It will definatly go better than your average xe :D


Only a little ;-)

Rear mount turbo could be interesting.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|
Top
 Profile  
 
 
sd1800
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 21, 2011 3:23 pm 
Tyre Shredder
Offline

Age: 36

Posts: 365

Joined: 22nd Nov 2007

Ride: FG MK2 XR6T

Location: Bexley, Sydney
NSW, Australia
Any reason why you don't look at s/c? Seems to be room there for it....

 

_________________

Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6.

Now......
Feb 2012 FG MK2 XR6 Turbo
- Manual
- Luxury Pack
Top
 Profile  
 
 
mustang6
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 21, 2011 7:52 pm 
Stock as a Rock
Offline

Age: 37

Posts: 180

Joined: 24th Jan 2008

Gallery: 3 images

Ride: 1966 mustang

Location: brisbane
QLD, Australia
sd1800 wrote:
Any reason why you don't look at s/c? Seems to be room there for it....



Have thought about it and doing a turbo kit is alot cheaper then a supercharge kit.

So thats pretty much it unless something come up real cheap then i wouldnt say no.

 

_________________

1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger.
330Rwhp @10psi.
Top
 Profile  
 
 
EBXR8380
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Tue Jun 21, 2011 11:50 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia
Ah twin Precision 6262's up front and GO for it...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....
Top
 Profile  
 
 
EFFalcon
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 22, 2011 10:10 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia
mid mount :D
Image

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V
Top
 Profile  
 
 
mustang6
 Post subject: Re: XE 5.4 Boss Project now starting.
Posted: Wed Jun 22, 2011 7:03 pm 
Stock as a Rock
Offline

Age: 37

Posts: 180

Joined: 24th Jan 2008

Gallery: 3 images

Ride: 1966 mustang

Location: brisbane
QLD, Australia
EFFalcon wrote:
mid mount :D
Image



Haha not bad what was that on?

If i was to do the rear mount setup the spare wheel well would get drilled out and turnt upside down and the turbo made up in that area :P and spare wheel can be mounted flat in boot

 

_________________

1966 mustang 4Litre GT45, 560cc injectors, Walbro 550intank, 4spd auto 2700stall,Ems Stinger.
330Rwhp @10psi.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 2  [ 24 posts ]  Go to page 1, 2  Next
Jump to:  

Home » Forums » Fordmods Tech » V8 Workshop

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 2:28 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names