|
| stronghold05 |
|
||
|
got 20ltrs castrol TQ-DIII, this will b fine for flush/replacement in my 98 el 4spd auto?, auto slips in drive after reversing when cold and not all the time but becoming more freq., also repco filter/gasket kit(17.95) any good??,
_________________ 98 el sapphire |
||
| Top | |
||
| TROYMAN |
|
||
|
the btr 4 speed auto should run tq95 not d3...
|
||
| Top | |
||
| stronghold05 |
|
||
|
do you know what the diffrence is??, says for all auto trans incl. toyota "t" series and all gm exept thse which require dexron(r) 6
_________________ 98 el sapphire |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
TQ95 is out dated, Most brands now have a synthetic fluid for the BTR
|
||
| Top | |
||
| stronghold05 |
|
||
|
can i completly flush th box then use th TQ DIII???,
_________________ 98 el sapphire |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: can i completly flush th box then use th TQ DIII???, 
|
||
| Top | |
||
| stronghold05 |
|
||
|
 thanx m8
_________________ 98 el sapphire |
||
| Top | |
||
| stronghold05 |
|
||
|
fond out can b used in falcons up to 96, but mines a 98 sealed unit(no dipstick), are they that diffrent really??
_________________ 98 el sapphire |
||
| Top | |
||
| stronghold05 |
|
||
|
castrol TQ DIII atf can only be used temporarily but not reccom. for replacement for TQ95 according to castrol (the local dealer rang castrol)
_________________ 98 el sapphire |
||
| Top | |
||
| stronghold05 |
|
||
|
repco brand dex(h) III atf (by penrite); 20ltrs $126; specs state for btr 4 spd (89/91/95le), so im gona use this for a flush/replacement, other recomm.oils; shell-ATF XTR, Ampol-Autotrans Fluid BW, Valvoline- ATF type 95LE, BP Autran LE, Mobil ATF 95LE
_________________ 98 el sapphire |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
|
||
| Top | |
||
| Benno The Viking |
|
||
|
Dex 3 can only be used on the 3 speeds, NOT the BTR 4 speeds. Use 95LE, as Troyman said. When I flushed mine I used 95LE, a lot of the Dex 3 bottles on them said "not for BTR gearboxes" or something similar.
Edit: I used some kind of TQ95 equivalent - definitely NOT dex 3.
_________________ Build Thread Last edited by Benno The Viking on Wed Aug 01, 2012 3:36 pm, edited 1 time in total. |
||
| Top | |
||
| Esteven8 |
|
|||
|
{USERNAME} wrote: got 20ltrs castrol TQ-DIII, this will b fine for flush/replacement in my 98 el 4spd auto?, auto slips in drive after reversing when cold and not all the time but becoming more freq., also repco filter/gasket kit(17.95) any good??, I believe the answer is No. 
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| Benny D |
|
|||
|
i was always under the impression there was only one oil recommended for the job -- TQ95
and the facepalms// 
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| stronghold05 |
|
||
|
yer i deserved th facepalms
, the oil i got says for btr 4speed (89/91/95le), gmdex3h and allison 4 spd auto, thats on the specs, on the front its dexron 3???  , im a little confused atm so the flush is on hold till i get SOME BLOODY TQ95!!!!!!, just wnt to get it done so can move on to other things!
_________________ 98 el sapphire |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
