|
| Falcon96kickass |
|
||
|
I Have finily got my fairlane high series cluster
wicked thanks to krytox I'm having some problems now she all plugged in the otherside loom has been cut off now when i turn on my head lights the LCD Screen on the cluster disapears and the gear positioner in the middle goes off aswell Cheers Danny
_________________ Your all a bunch of f**k Heads delete this f**k account stupid useless C*** who run this site cant even sell something useless wankers |
||
| Top | |
||
| Happy |
|
|||
|
have you read the doco on installing a high series cluster ?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| twirqurky |
|
||
|
If its the problem as fitting a Fairmont one to a GLi/Futura, then you need to solder on a resistor onto the back of the circuit board.
Thats my guess. |
||
| Top | |
||
| twase |
|
|||
|
The resistor will be missing for the odo, not sure about the gear mimic panel though. There is no documented position for the high series cluster resistor, SNAP had worked out that it could be positioned external to the cluster anyway. Give him a pm perhaps.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Bear in mind that this is theory:
Adding the LCD dimming resistor: The resistor is of the same specs as discussed in http://www.fordmods.com/forums/documents.php?doc=14 , 47 ohm 1watt, use this doco for the pin out information as well. The good news here is that you dont need to dismantle the instrument cluster to insert the resistor. 1. Remove the dash surround, and access the RH (right hand) 20 pin cluster plug. 2. Locate pin 19 which is the earth (black wire) & check continuity between it and earth to confirm. 3. Locate pin 16 which is black/white (-ve LCD illumination). 4. Strip a small section of these two wires, and solder the resistor across them, do not cut the wires. 5. Suitably insulate the solder connections. 6. Insert the plug into the cluster. 7. Test, and if all okay, 8. Reinstall the dash surround.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
Happy wrote: have you read the doco on installing a high series cluster ?
pretty detailed....now i just need the cluster 
_________________
|
|||
| Top | |
|||
| Falcon96kickass |
|
||
|
Happy wrote: have you read the doco on installing a high series cluster ?
Yes i have and it was very helpful
_________________ Your all a bunch of f**k Heads delete this f**k account stupid useless C*** who run this site cant even sell something useless wankers |
||
| Top | |
||
| shannonwulff |
|
|||
|
snap0964 wrote: Bear in mind that this is theory:
Adding the LCD dimming resistor: The resistor is of the same specs as discussed in http://www.fordmods.com/forums/documents.php?doc=14 , 47 ohm 1watt, use this doco for the pin out information as well. The good news here is that you dont need to dismantle the instrument cluster to insert the resistor. 1. Remove the dash surround, and access the RH (right hand) 20 pin cluster plug. 2. Locate pin 19 which is the earth (black wire) & check continuity between it and earth to confirm. 3. Locate pin 16 which is black/white (-ve LCD illumination). 4. Strip a small section of these two wires, and solder the resistor across them, do not cut the wires. 5. Suitably insulate the solder connections. 6. Insert the plug into the cluster. 7. Test, and if all okay, 8. Reinstall the dash surround. 47 ohms dims it a fair bit. slightly less would be optimal, otherwise that method is fine. we just shorted those pins so it didnt dim at all, just personal choice
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Just depends how much more load you put on the BEM dimming circuit by reducing the resistor size - it may reduce the life of those components.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| biggav |
|
|||
|
i have a EA s pack with the NA fairy dash(climate control ect) is it still possible to still use the old analog cluster is stead of the digi type?
_________________ 4.0lt Balanced Bottom End, ACL Race Internals, Rspec4 Cam, BPT Swichchip, PH4480, 2.5' Lukey, Scorcher Bodykit, T5 Manual frd906 wrote: LOLLOLLOLLOLOLLOLLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 86 guests |
