|
spinner1987 |
|
||
|
please help me i need a chip car running like s**t with new cam
|
||
Top | |
racedirector |
|
|||
Age: 63 Posts: 1584 Joined: 20th Mar 2005 Ride: EDL Fairmont Wagon/AU XR8 Ghia Location: Riverstone |
GO here...
http://www.tiperformance.com.au/index.php Cheers RD
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
Top | |
spinner1987 |
|
||
|
yeah i have that site bit i have to tell someone here what model car i have and what mods for a custom chip
|
||
Top | |
racedirector |
|
|||
Age: 63 Posts: 1584 Joined: 20th Mar 2005 Ride: EDL Fairmont Wagon/AU XR8 Ghia Location: Riverstone |
Ah, OK. I'm sure someone who knows about this stuff will answer soon... good luck
Cheers RD
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
Top | |
spinner1987 |
|
||
|
thanks
|
||
Top | |
KWIKXR |
|
|||
|
galapogos01 is the man to speak to
ecu-fuel-system-eec-f21/tuning-your-falcon-with-a-t-i-performance-j3-chip-t68577.html?hilit=j3%20chip |
|||
Top | |
SWC |
|
||
|
spinner1987 wrote: please help me i need a chip car running like s**t with new cam What cam did you fit and did you use a vernier gear? |
||
Top | |
spinner1987 |
|
||
|
i used a wade 1673 and no whats a vernier gear?
|
||
Top | |
KWIKXR |
|
|||
|
Have you given the ECU a bit of time to adjust to the new cam? Usually after a cam swap the car will behave a bit odd until the ECU relearns its maps again after a while of driving.
The 1673 shouldn't require a custom tune in order for it to run properly. |
|||
Top | |
spinner1987 |
|
||
|
yeah have been driving the car normal for like to days now it just idels is f**k
|
||
Top | |
bry40l |
|
|||
|
the 1673 doesnt usually need a tune, anything bigger will run rich and need a tune, maybe try disconnecting the battery over nite which ressets the ecu all together, then reconnect it in the morning and let it relearn all over again
_________________ BF XR6 |
|||
Top | |
spinner1987 |
|
||
|
i will try that to night
|
||
Top | |
SWC |
|
||
|
Have you checked your timing?
|
||
Top | |
SWC |
|
||
|
spinner1987 wrote: i used a wade 1673 and no whats a vernier gear? A Vernier Gear is an adjustable Cam Sprocket. |
||
Top | |
TROYMAN |
|
||
|
you shouldnt need a chip to run a 1673 cam..
maybe the engine is a little tired?? cam change= drop in manifold vacuum= poor map signal at idle.. if the engine has alot of kms on it the manifold vac may be a little low to start off with?? |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 9 guests |