|
| finnigan001 |
|
|||
|
hi guys,
Somehow missed all the action in this thread  . Updated the original setup post with other info that wasn't clear and the incorrect info of the "yellow" wire.Should really do another post with setups of winlog and the actual logger config setup for those who are new or interested in getting into it. Anyways, i have a question for you guys who have set this up now. I have been using the logger for ages but had never connected the vss. I have connected it up for the first time and em not getting anything useful from winlog. Im not sure what the vss pulse setting should be. Im sure its something simple. EDIT: It looks like these are the settings i need help with. What are you guys using. i know different diffs will cause this to change. But just to give me an idea. VSS Triggers Per Revolution VSS Divisor Cheers, Tim
_________________ 1995 EF Futura |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
You'll need to work out what value to use as the divider. I travelled at a constant road speed trying settings to work it out, but i'm sure you could do it mathematically if you knew the frequency value of the sensor at a certain speed. I also had to average it over 10-odd samples to get a smooth reading.
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| the sam |
|
||
|
Jase,
In regards to the wb+ ouput and wb- input on the 2j9, where is the best place to connect these?
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
EDIT: Updated for clarity
WB+/- should only be connected if you have an aftermarket ECU or gauge with a 0-5V input. NBsim will go to the O2 input on the ECU for the stock ECU. Cheers, Jason
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! Last edited by galapogos01 on Mon May 06, 2013 2:26 pm, edited 1 time in total. |
|||
| Top | |
|||
| the sam |
|
||
|
galapogos01 wrote: WB- will go to your signal return/earth on the ECU, WB+ will go to the O2 input on the ECU. This should be clear enough above I would have thought? Cheers, Jason Yeah it was clear when i first read it but then i re-read the tech specs on the wb02 site and it confused me  The existing 02 sensor loom should have the negative earthed and the positive connected to the nb output on the logger?
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| the_fig |
|
||
|
hi
just recently bought a 2J9 unit from TIperformance can not get the bloody thing to work in frame 2.0 only works in 1.5 which is no good have looked all through there forum people have had the same problem but never got resolved has any one else had the same problem oh and for the wb+.... do you still plug it in because i took out the original sensor to put the this one in and wb- do i take the earth from the body and plug it in or tap into it cheers fig |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Can't remember what frame type I use but it worked fine with all functions. Whats the actual problem, besides a smaller number?
You don't need to touch the wb+/- unless you have a 5v gauge or ECU. You need to connect up the nbsim output to the stock o2 sensor input on the ecu, as explained elsewhere in this thread. Cheers, Jason
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| the_fig |
|
||
|
i have an ECU for the au block inside the XD
|
||
| Top | |
||
| the_fig |
|
||
|
the device should be run at 2.0
im not getting a AFR ive uploaded 2 videos the first one is showing that the device works in 1.5 and when i try and run it in 2.0 if fails http://s870.photobucket.com/user/figgie ... 6.mp4.html the second video shows that i have added the wb wires and nbsim still dont get AFR http://s870.photobucket.com/user/figgie ... 9.mp4.html from left to right wb+ = h02 inpt wb- = ho2 earth earth = ho2 earth nbsim = return sig rpm = tachomete sig vss = speedometer sig user 1 = map input |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Why are you using TEWBLOG? It was superceded by WinLog years ago. All of the doco refers to WinLog. Try with this.
As I said above, the wbo2 output wires have nothing to do with AFR sensing. If the sensor is plugged in and the unit is powered you should be seeing AFR via the serial port, unless you have a problem with your serial cable or USB convertor. Suggest putting a post on the Techedge forum if you need help with that. Cheers, Jason
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| the_fig |
|
||
|
dont worry i figured it out no help from techedges CEO the fkn a**hole pretty much treated me like a retard he couldnt be screwed watching the video or listening
im using tewblog because they both didnt work ... it seems to be a problem with windows 7 home edition... nothing wrong with cable/port/serial or laptop oh and user 1 is tps input not map |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Windows 7 won't be the issue. Make sure that if the computer has Bluetooth that the bluetooth serial port is disabled. Find the com port for your device and make sure there are no clashes.
All inputs are configurable. Cheers, Jason
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| the_fig |
|
||
|
ive already got it to work
but the only problem i get now is when using winlog dont get a decent afr but when i use tewblog i get a good reading i dont get it so i cant really get a decent matrix |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Hey guys,
Just a short note to mention that we've just uploaded a guide on how to install and configure the TechEdge 2J Wideband O2 Logger to help tune your Falcon. Check it out at http://tiperformance.com.au/Technical/T ... 0Guide.pdf Remember we sell the TechEdge 2J at a discounted rate too! Cheers, Jason
_________________ T.I. Performance - Ford Performance Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| the_fig |
|
||
|
ive read everything i thought i had it working but car still doesnt want to run properly i can start it up & drive it but for less then a minute but after that it just stalls
http://s870.photobucket.com/user/figgie ... 2.mp4.html if you watch this you will here it chug as coming up to round about and i cant continue driving no throttle responce so i turn it off and turn it back on straight away and can take off no problems so i have no idea whats going on i think its either the ECU isnt getting any info from 02 sensor or a faulty j3 chip i have the wblin+ as pin 35 wblin - & GRND as pin 4 NBsim is the return for stock 02 sensor so what pins should they be   allright this picture on there site doesn't make any bloody sence A-in A-out ? 
Last edited by the_fig on Wed May 22, 2013 4:55 pm, edited 1 time in total. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
