|
| ef_falcon_95 |
|
|||
|
Thought I'd start a thread to keep it out of the build . Anyway the tuner says my 42lb injectors are nearly maxing out and I need a rising rate fuel reg ?
Now to my understanding after market ecu , bigger injectors and fuel pump is all that's needed , and those adjustable regs were the dodgy way to go with stock tune . It seems that most cars he tunes are using a rising rate reg with a microtech ecu . Not sure about bigger injectors . I'm going to get one of those regs but I do have a 400 kpa xr6 turbo reg I will use . Any opinions ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
This is it
http://pages.ebay.com/link/?nav=item.vi ... 0753199191
_________________ El XR6 Turbo |
|||
| Top | |
|||
| 67RCE |
|
||
|
193rwkw is no where near maxxing 42's. You'll get closer to 300rwkw with them.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
i thought so 42lb can support more than what im making. maybe he means there working harder than they need to ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TROYMAN |
|
||
|
what fuel reg are you using now??
i would fit an au fuel rail with the xr6t reg, the xr6t reg is 400kpa and is a 1:1 rising rate.. i was running the au 350kpa reg with 65lb injectors and they were only running at 30% on 12psi+ with heaps of room for improvement.. if a ba xr6t with 29lb injectors can make 200+rwkw you shouldnt have any issues with 42lb injectors.. if your ecu can run low imedance injectors i have a set of 65lb delphi injectors for sale if your interested... |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
I'll find out if it can run low impedance . I'm using standard el xr reg
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
i only use standard reg on my car . and have 42lbs injectors .no need for it
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| xcabbi |
|
||
|
Who's tuning your car (I suspect its Motortech)? I think you should find another tuner before you buy a rising rate fuel regulator.
|
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Not them , kev at south coast rotary . I already have a 400kpa xr6 turbo reg . Just need a au fuel rail .
Can the billet fuel rails for ba -Bf fit ? There only $160 on eBay , would look better than the standard rail .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| GeZza200 |
|
||
|
is your car running really rich. I'm making the same power with standard BA injectors. Something doesn't sound right at all.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
When I put my foot down a big puff of black smoke comes out but goes away once boost comes on .
I think the low power has to do with how my boost controller is set up . I have it starting to open at 4 psi . It's set at 10 psi but max boost its making is 8.5 psi . I'm thinking the engine is having to work harder to make max boost as it starts dumping it at 4 psi . so I'm going to fit a 10 psi spring , run 10 and set to open at 10.
_________________ El XR6 Turbo |
|||
| Top | |
|||
| GeZza200 |
|
||
|
ahk is that to save your T5?, Your power seems pretty low for 8.5psi boost. My brothers dead stock AU XR6 VTC with a pretty small turbo at 8psi is making 230rwkw. Has the mob that is tuning your car tuned falcon turbos like yours before?
I wondering if its actually making 4psi max boost. You have a good setup and cam, It should be making more.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Nah not worried about the t5, my tuner only tunes rotarys,so mostly mazdas. I think I'm the first with a turbo falcon .
I'll see how it feels after I change the spring and make the gate open later, he says he can't get anymore power out of it as injectors are maxing out, which is impossible. I was disappointed when it didn't even make 200rwkw . I've done everything the right way and have potential to make alot more than that on 8 psi . Who knows what's going on , I don't think the dyno reads low as the car doesn't feel much more powerful than when it was n/a with 977b and 157 rwkw .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
The reason I had the gate to open at 4 psi is because I was going to run 6 psi but decided to set the controller to 10 psi , but forgot to change when the gate starts to open. I think the gate opening this early is causing the low power .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| GeZza200 |
|
||
|
I would be taking it somewhere else with what you have done to your car at that boost you should be more like ~240rwkw
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
