Hi all,

Can anyone verify that the rearmost pin on the TFI module (the one to furthermost from the big plug at the front) that goes into the dizzy itself is an earth?

Trying to work out how I'm gonna wire this up, and from doing some testing with the multimeter, it is showing continuity between the rear pin and the mounting points (which bolt to the dizzy and are therefore negative.)

just double checking my findings here so I don't blow my TFI when I wire it up.

If someone has a TFI module and a multimeter lying around could you possibly check for me?
Normally, I'd believe my measurements.. but the module picks up earth from the body of the dizzy anyway, so why have an extra wire as well?

ta

rgds

Frank