Here is a photographic guide how to change the interior light globes in your BF XR Falcon.

Firstly, here is a link to where I got my globes from. Very fast postage and very nice product.

{DESCRIPTION}


-----------------------------------------------
Reading Lights
-----------------------------------------------


Remove the housing by grabbing from one corner and pulling down until clips release.


Remove housing and unclip power from the back.


To remove lights, grab and rotate anticlockwise


Remove globe by simply pulling straight out.


Replace globes with your desired colour LEDs


Plug the power back in and push the housing back into the roof until it clips in.


Done.


Before & After



-----------------------------------------------
Main Cabin Light
-----------------------------------------------


Start by removing the plastic cover.


Now remove the globe, be careful, this is really tight so try and loosen the clips a little before pulling on the globe.


Replace with the desired colour LED.


Replace plastic cover.


Before & After


-----------------------------------------------
Rear Seating Lights
-----------------------------------------------

Remove by using fingers or a flat head screw driver to open from the drivers end of the housing.


Unplug from power for easy globe removal


These globes are bayonet type globes, so just push and rotate.


Close up of the globe and housing.


Here is the fitting




After completing all globe changes.


Thanks guys.

Ignition Illuminator Guide
{DESCRIPTION}

Awesome Work. Now a sticky
We will work at adding it in the doco section.

Very good, useful for AU's too