|
Disco Frank |
|
|||
|
ok so this new AU XR6 a 99 so its a series 1.5
has issues with the passenger electric window it will go up and down via drivers side switch panel but only UP from the passenger switch i have sourced another switch from a wrecker and same issue... could it be the switch or a wiring issue of sorts? cheers!
_________________ RIP SCOTT |
|||
Top | |
Mad2 |
|
|||
|
well seeing as ya tried another switch .... i'd be thinkin wiring
|
|||
Top | |
Atlas600 |
|
|||
|
Mine does the same.. take the switch apart and give it a clean. If not it could wiring..
|
|||
Top | |
snap0964 |
|
|||
|
{USERNAME} wrote: well seeing as ya tried another switch .... i'd be thinkin wiring But the drivers circuit goes through the same wiring to the motor Frank, strip and clean the pass switch contacts - probably good idea to check with a meter at the plug also, possibly make up some wire links to make the shorts in the plug to simulate the switch. From memory, you should be able to ID which terminal does what from the EF/EL power window doco.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
TROYMAN |
|
||
|
{USERNAME} wrote: Mine does the same.. take the switch apart and give it a clean... this...^^^^^^ I had the same issue on both my au's. I pulled the switch apart and cleaned them.... |
||
Top | |
Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: well seeing as ya tried another switch .... i'd be thinkin wiring But the drivers circuit goes through the same wiring to the motor welll it got him his answer {USERNAME} wrote: Frank, strip and clean the pass switch contacts - probably good idea to check with a meter at the plug also, possibly make up some wire links to make the shorts in the plug to simulate the switch. bit unusual that two seperate switches would be faarked tho |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 21 guests |