Hey guys I searched and found some info though they are all older posts and not sure if anybody is paying attention to them and not what I'm asking specifically



I've done 90% of my aut to manual conersion

-ECU changed to a manual 6 speed one out of a BA
-6 speed installed with new heavy duty clutch + flywheel
-Manual tailshaft installed
-Pedals installed and hooked up
-clutch fluid reservoir installed
-shifter installed and selcts gears find
-speedo cable and reverse lights spliced into the 4 speed loom

My issues are
-break lights will not turn off when car is on
-car will not start with the key I have to put it in ignition and cross the relay
-car WILL NOT go over 2.5k RPM
-Blowing a bit of black smoke

NOTES: I had a custom tune on the old ECU and unmarried my SCT Tuner from that and uploaded the tune to the manual ECU SUCCESSFULLY

I had a guy come out and reprogram the ECU to the immobiliser and he said that was all there is to do.
Any Pointers will be greatly appreciated