|
hdhertg |
|
||
Age: 68 Posts: 4 Joined: 1st Nov 2011 Ride: 2007 BF MKII Fairmont Ghia Location: Melbourne |
HI all
I have a 2007 BF MKII Fairmont Ghia, I recently replaced the steering column in the car due to the ignition not returning to on position after starting. The problem I have now is that when I drive the car the Dynamic Stability Control Light comes on and stays on. When I start the car when parked this light is off as soon as I start to drive it comes on. At the base of the steering column, there is a black module if I start the car and unplug this module the DSC comes on, I think this may be the problem? Thanks Godfrey... Did some research on the internet and it looks like the problem is in the steering angle sensor and that it will have to be checked and recalibrated. |
||
Top | |
TedW |
|
||
|
{USERNAME} wrote: HI all I have a 2007 BF MKII Fairmont Ghia, I recently replaced the steering column in the car due to the ignition not returning to on position after starting. The problem I have now is that when I drive the car the Dynamic Stability Control Light comes on and stays on. When I start the car when parked this light is off as soon as I start to drive it comes on. At the base of the steering column, there is a black module if I start the car and unplug this module the DSC comes on, I think this may be the problem? Thanks Godfrey... Did some research on the internet and it looks like the problem is in the steering angle sensor and that it will have to be checked and recalibrated. Scan for fault codes . Check brake lights work correctly. Have steering angle sensor recalibrated - local auto electrician should be able to do this. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 35 guests |