|
| Gav_21 |
|
||
|
can the TFI module be removed without taking out dizzy? need to fix my car asap so ne help on how to remove it would b great thanks
|
||
| Top | |
||
| Olive Xm |
|
|||
|
Yes it can did it to mine last week after it craped its self.
|
|||
| Top | |
|||
| Gav_21 |
|
||
|
ok cool how did u do it bcos i sussed it out and saw that it was screwed to it or it looked like it was screwed to it?
|
||
| Top | |
||
| Olive Xm |
|
|||
|
1 pull out plug
2 there are two screws to remove because of air con compressor i loosened the dizzy and turned it so i could get to the bottom screw 3 then module pull down |
|||
| Top | |
|||
| BOSS 4LTR |
|
|||
|
yes u can, usually is held on by two small phillips screws, be sure to apply some new heat transfer paste two the new tfi module.
up to you, but if its because your car is turning itself off after while driving it, this is what my el did, your better off just buying the whole dizzy as they come with the tfi module already on it, distributers only usually last around 100k anyway.
_________________ EL Falcon XR6, 2.5in exhaust, extractors, ported throttle body, sequential intake, CMS stage 2 head. Tickford cam!!!!! |
|||
| Top | |
|||
| Gav_21 |
|
||
|
how hard is it to replace the whole dizzy?
|
||
| Top | |
||
| Sommers NL |
|
|||
|
not hard at all, just need to match up the markings so its on the finish or start (i can't rememeber) when the motor is on TDC on the compression stroke.
_________________ BANNED!!!! |
|||
| Top | |
|||
| misk_one |
|
|||
|
exactly right sommers.
set the engine to TDC on comp stroke, line up the dizzy to the start point, push the dizzy down while holding it, it should engine up with the rotor facing the finish mark. Im bout to do this this weekend to try and get rid of a miss 
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| Foulcoon |
|
|||
|
Can someone tell me if I can replace the TFI module on a V8 without taking the dizzy out?
Cheers.
_________________ meh. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
{USERNAME} wrote: yes u can, usually is held on by two small phillips screws, be sure to apply some new heat transfer paste two the new tfi module. up to you, but if its because your car is turning itself off after while driving it, this is what my el did, your better off just buying the whole dizzy as they come with the tfi module already on it, distributers only usually last around 100k anyway. what was your car doing exactly? Im trying to track down a problem that sounds similar to that
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
