|
| Robert_au |
|
|||
|
Hi all
I got a mate having starting issues with his ED falcon, no starter motor (its been on going for a few months and gerting worse, no surprise there) bash the dash where the BCM is and comes good so it's the dreaded dry joints I'm guessing. He would like to replace the BCM (it's a red one). My question is what colours are usable and what other models BCM is compatable. Would anyone on here have a red one in good condition they would like to part with would help him heaps. Thanks guys hope to hear back soon. Rob
_________________ Current Ride |
|||
| Top | |
|||
| SWC |
|
||
|
EB/ED have a seperate smartlock module to the BCM.
EF/EL/AU1 had smartlock built into the BCM. |
||
| Top | |
||
| Robert_au |
|
|||
|
{USERNAME} wrote: EB/ED have a seperate smartlock module to the BCM. EF/EL/AU1 had smartlock built into the BCM. Thanks SWC. Where is the module located? I have suggested to mate to join the red with blue stripe wires together to By-pass the starter circuit IF he feels he wants to try it, and if that will work :/ Rob
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: EB/ED have a seperate smartlock module to the BCM. EF/EL/AU1 had smartlock built into the BCM. Thanks SWC. Where is the module located? I have suggested to mate to join the red with blue stripe wires together to By-pass the starter circuit IF he feels he wants to try it, and if that will work :/ Rob if you mean the EB/ED ... above handbrake could also pull it out [smartlock module] & either redo solder joints and/or replace the relay involved?? |
|||
| Top | |
|||
| Robert_au |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: EB/ED have a seperate smartlock module to the BCM. EF/EL/AU1 had smartlock built into the BCM. Thanks SWC. Where is the module located? I have suggested to mate to join the red with blue stripe wires together to By-pass the starter circuit IF he feels he wants to try it, and if that will work :/ Rob if you mean the EB/ED ... above handbrake could also pull it out [smartlock module] & either redo solder joints and/or replace the relay involved?? yep in ED, i thought that would be the case. not sure if mate even has a soldering iron, if i was up where he is 2000km away id replace and reflow the joints for him. he's looking for another module to change it over. Thanks Mad2 Rob
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
how did you/he go??
|
|||
| Top | |
|||
| Robert_au |
|
|||
|
{USERNAME} wrote: how did you/he go?? Not sure, havent herd back since that day, did see his missus complaining it was still stuffed, so i'd guess no luck or hasnt done anything.
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
oky doky
|
|||
| Top | |
|||
| Tommo52 |
|
|||
|
{USERNAME} wrote: Would anyone on here have a red one in good condition they would like to part with would help him heaps. If you're still after a Smartlock and BCM module I have some I can send your way. Won't be until payday though lol, if you still need it.
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Robert_au |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Would anyone on here have a red one in good condition they would like to part with would help him heaps. If you're still after a Smartlock and BCM module I have some I can send your way. Won't be until payday though lol, if you still need it. Thanks for the offer mate, the bloke that was looking for it ended up giving up and sorting out a new car and sending the other to the the wreckers sadly  i'd deffs say to hold on to them never know when someone else will need one.
_________________ Current Ride |
|||
| Top | |
|||
| Tommo52 |
|
|||
|
No worries man.
Happy to help where I can and don't worry, they'll be sitting in a wreck until someone has a use for them. 
_________________ I've never liked Trees since, not one. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
