|
| EDRAG |
|
||
|
Ok so its the smartlock plug im looking at so what should i do join 25 and 18 even though there not the right colours or is there another way to bridge it from some were like the ecu? I have no idea why this plug is different this is my first ford i am a holden man and i thought id take a chance on the fird name maybe i was wrong
|
||
| Top | |
||
| TROYMAN |
|
||
|
take a pic of the plug if you can..
it has to be done at the smartlock module as there is a starter in and starter out, the smartlock module is the switch.. check for voltage at pin 25 while trying to crank the engine, if there is 12v while trying to crank and no voltage when not cranking i would say the pins are the same just the wires are different colours... just curious, what is your ed? gli, fairmont , xr6 ect???? |
||
| Top | |
||
| EDRAG |
|
||
|
Gli clasic buddy
|
||
| Top | |
||
| EDRAG |
|
||
|
 thats the plug side 14 to 26 14 starts on the right side |
||
| Top | |
||
| bryce67 |
|
||
|
Will it start?
_________________ 1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw |
||
| Top | |
||
| EDRAG |
|
||
|
nope the smart lock light flashes and it dont crank
|
||
| Top | |
||
| bryce67 |
|
||
|
with the car fully off dose it flash if so when,u turn the key onto accsesories dose the smart lock light stay on for like 5 secs?
_________________ 1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw |
||
| Top | |
||
| bryce67 |
|
||
|
with the car fully off dose it flash if so when,u turn the key onto accsesories dose the smart lock light stay on for like 5 secs?
_________________ 1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw |
||
| Top | |
||
| EDRAG |
|
||
|
Yeh then if i keep trying it starts to flash
|
||
| Top | |
||
| bryce67 |
|
||
|
U sure its not the park nuetral switch?
_________________ 1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw |
||
| Top | |
||
| EDRAG |
|
||
|
Its manual
|
||
| Top | |
||
| EDRAG |
|
||
|
Dose that plug pic work ok troyman
|
||
| Top | |
||
| TROYMAN |
|
||
|
yea the pic worked...
did you test pin25 while turning the key to crank to see if there is any power?.. another thing you could do is look at the wires that goes to the starter relay to see what colour they are... my whole starter curcuit (engine crank) from relay through the loom to the smartlock module and to the ignition switch is all red/blue... |
||
| Top | |
||
| mikeyeb87 |
|
||
|
Hi having same problem with my 94 fairlane it won't crank over but turn accessories on run a wire from batter with button to starter and it will start have tried the relays nothing are u suppose to bridge pin 18 an 25 to start it or just test them with voltmeter unsure or any other helpful tips and if I keep the button how would I solve problem of slow crank
|
||
| Top | |
||
| mikeyeb87 |
|
||
|
Any 1 got an idea would help ASAP pleasssssssse
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |