hi guys,
im currently in the process of selling my ef falcon and the bcm has decided to startbeing picky with when it wants to start,
its a 96 EF GLI sedan with a low series (black) bcm
i was just wondering if its possible to re wire the stock one to stop the issue of it not starting all the time? after ALOT of google searches i seem to have found out that i can rewire and fix this issue, but all the comments iv read state i connect a red/blue wire?
mine doesnt have a red/blue wire going into it?
am i looking at the wronf plug? is it on the plug closest to the floor? the one near the firewall?
can someone please help me as i want to sell the car asap and i will find it impossible to do so with this issue
thanks

if you hold the key on start and thump under the dash near your left knee, does it start? if so i'd say you have dry/cracked solder joints inside the BCM. you can pull it apart and resolder them

yeah that works, i pulled it apart the othr day and it seemed fine, nothing was wrong with the pcb or anything, it was jsut very dusty... i cleaned it up and reinstaleld it and it was fine until tonight....

i have read i can connect two wires together to bypass the smartlock??

im not sure about how to bypass the smartlock, but im running a j3 with smartlock disabled and mine still does it.