Fordmods Logo

egas BA wont crank 

 

Page 2 of 2 [ 21 posts ] Go to page Previous  1, 2

 
 Post subject: Re: egas BA wont crank
Posted: Wed Jul 27, 2016 8:12 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 11

Joined: 24th Jul 2016

Ride: for BA

Location: adelaide
SA, Australia

{USERNAME} wrote:
When you turn the key on the pcm should put a ground on pin 85, providing the contacts are closed in the inhibitor switch on the trans. When you turn the key to start battery voltage should be on pin 86 and the main contacts will close in the relay switching battery voltage between pin 87 and 30 which will flow to the solenoid. With the key off there is no ground on 85, to be sure I checked my straight gas bf. If your inhibitor switch is alright and battery voltage is going to the pcm you have to find out why it wont put a ground on with the key on. Do's every thing work dash lights and cluster what about when you cranked the engine did you see the tacho move indicating there is a crank signal, also when you turn the key on the ignition relay should supply power to the lpg fuse and relay.

all dash lights work but brake fail light comes on when you try to start the car should i hear the gas system prime when i turn the key
Top
 Profile  
 
 
 Post subject: Re: egas BA wont crank
Posted: Wed Jul 27, 2016 8:36 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 11

Joined: 24th Jul 2016

Ride: for BA

Location: adelaide
SA, Australia

{USERNAME} wrote:
{USERNAME} wrote:
When you turn the key on the pcm should put a ground on pin 85, providing the contacts are closed in the inhibitor switch on the trans. When you turn the key to start battery voltage should be on pin 86 and the main contacts will close in the relay switching battery voltage between pin 87 and 30 which will flow to the solenoid. With the key off there is no ground on 85, to be sure I checked my straight gas bf. If your inhibitor switch is alright and battery voltage is going to the pcm you have to find out why it wont put a ground on with the key on. Do's every thing work dash lights and cluster what about when you cranked the engine did you see the tacho move indicating there is a crank signal, also when you turn the key on the ignition relay should supply power to the lpg fuse and relay.

all dash lights work but brake fail light comes on when you try to start the car should i hear the gas system prime when i turn the key
hey Ron just checked gas fuse no power and the tacho has no movement looks to b a pcm issue but if thats the case shouldn't the smart lock ight be flashing
Top
 Profile  
 
 
 Post subject: Re: egas BA wont crank
Posted: Wed Jul 27, 2016 9:29 pm 
Fordmods Newbie
Offline

Age: 56

Posts: 11

Joined: 24th Jul 2016

Ride: for BA

Location: adelaide
SA, Australia

thanks for your help guys found the problem blown injection fuse never checked it as the car is gas and has no injection
Top
 Profile  
 
 
 Post subject: Re: egas BA wont crank
Posted: Thu Jul 28, 2016 1:45 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

What's the correct fuse name ? - just for reference for others reading this thread.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: Re: egas BA wont crank
Posted: Thu Jul 28, 2016 9:18 am 
Fordmods Newbie
Offline

Age: 56

Posts: 11

Joined: 24th Jul 2016

Ride: for BA

Location: adelaide
SA, Australia

{USERNAME} wrote:
What's the correct fuse name ? - just for reference for others reading this thread.

fuse number 30 inside cab
Top
 Profile  
 
 
 Post subject: Re: egas BA wont crank
Posted: Thu Jul 28, 2016 10:38 am 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

{USERNAME} wrote:
What's the correct fuse name ? - just for reference for others reading this thread.


Injector Fuse, as the OP said, fuse 30 (15A).
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 21 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 1:35 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names