|
| devilsinagra |
|
||
|
Hey all . Have a el falcon . It just stop oneday . Have replaced ingnition and bcm . Car turns over and has spark but no injection . Noe when i recoded bcm and ignition it does the door lock cycle but smartlock light doesnt go out till u turn key off . Has all traits of being imobilised but no smartlight flashing . Any ideas to fix
|
||
| Top | |
||
| SWC |
|
||
|
Looks like you may have a faulty BCM.
|
||
| Top | |
||
| devilsinagra |
|
||
|
already replaced the bcm , and it doesnt matter if i use the old bcm or the new one same problem . even tried with 2 diff ignition systems still does the same thing . there is power to the injectors but no pulse . cane put fuel in the throttle body and car will start but soon stops
|
||
| Top | |
||
| SWC |
|
||
|
One thing Smartlock does is kill the Injector signal.
Are you sure the new BCM is good? |
||
| Top | |
||
| devilsinagra |
|
||
|
well im hoping it is , but seeing it does the same ting with 2 diff ones guessing thats not the prob
|
||
| Top | |
||
| SWC |
|
||
|
As I asked, are you sure the new BCM is a working unit?
|
||
| Top | |
||
| devilsinagra |
|
||
|
how would i go about testing it ?
|
||
| Top | |
||
| SWC |
|
||
|
Give the dash a smack where the BCM is located and see what happens.
|
||
| Top | |
||
| devilsinagra |
|
||
|
ok will try that , did it with old on and didnt work
|
||
| Top | |
||
| TedW |
|
||
|
Try After downloading key to BEM and door locks cycle turn to start position just after locks cycle not off or to long after lock cycle or program cycle has to start again..........make sure interior light works?
|
||
| Top | |
||
| snap0964 |
|
|||
|
Pull the fault codes from the ECU, check if injector enable from the BEM is one of them.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 38 guests |
