|
| fezlane |
|
|||
Age: 58 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
Has anyone out there had any experience with the jaycar speedo corrector. I cant get the bloody thing to work. HAve tried calibrating it as they say in manual but cannot get the led to flash. I know it works as it will flash the confirmation signal when you go into one of the modes. Just about ready to put it under the wheels and drive over it.
Putting it into a nl fairlane with ba motor. Are there any alternatives. Cheers Steve |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
are you running the old 4spd rear extension housing? so u can use the oem spedo sender?
if so why not get the correct gear for the sender
_________________ RIP SCOTT |
|||
| Top | |
|||
| fezlane |
|
|||
Age: 58 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
i am running a t5 until it blows. Speedo is out about 40% no speedo gear will fix that.
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: i am running a t5 until it blows. Speedo is out about 40% no speedo gear will fix that. why is it out for? different diff ratio?
_________________ RIP SCOTT |
|||
| Top | |
|||
| JOSE |
|
|||
|
i have used (a modified) one before, mine just went in and worked perfectly though. are you getting any response to an input signal?
_________________ Because i can. |
|||
| Top | |
|||
| SWC |
|
||
|
Are you running the BA PCM?
|
||
| Top | |
||
| fezlane |
|
|||
Age: 58 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
Hi Guys
I am running a t5 in this car with ba xr6bturbo engine aand running thr engine of the ba ecu. I do get a peedo signal but its way put when speed is showing 60kmh I am actually doing 100kmh. When I had ecu reflashed i gave all parameters etc but maybe something was not done and I cant check it myself. So i thought easiest thing to do is get a speed corrector.  MAybe this one would work? Cheers Steve |
|||
| Top | |
|||
| SWC |
|
||
|
Did you get an Xcal3 for the PCM? If you did you can adjust the speedo reading through the PCM.
|
||
| Top | |
||
| fezlane |
|
|||
Age: 58 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
THanks for that that was the next item on the list.
Cheers Steve |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
