Fordmods Logo

LED CAN Bus Dome light 

 

Page 2 of 2 [ 20 posts ] Go to page Previous  1, 2

 
 Post subject: Re: LED CAN Bus Dome light
Posted: Sun Sep 07, 2014 4:14 pm 
Getting Side Ways
Offline

Age: 65

Posts: 1128

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Crestmead
QLD, Australia

hmmm,

Occasionally get the odd thing happening again with the LED light, also same problem at times with the incandescent bulb, ended up not using any of them just yet, using head torch if need be to collect items from inside of car at night.

Very problematic finding the root cause.

Bondy
Top
 Profile  
 
 
 Post subject: Re: LED CAN Bus Dome light
Posted: Mon Sep 08, 2014 1:16 am 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

when playing up does door ajar light come on - when playing up try disconnecting dome light switch -

check wiring under/around seats is not jammed/wriggle harness
Top
 Profile  
 
 
 Post subject: Re: LED CAN Bus Dome light
Posted: Mon Sep 08, 2014 1:10 pm 
Getting Side Ways
Offline

Age: 65

Posts: 1128

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Crestmead
QLD, Australia

TedW,

Never had any "door ajar" lights come up or any alarm sound, dome light slide switch is integrated with main light switch. I've checked wiring under and around seats about 10 times. No wires jammed.

Cheers
Top
 Profile  
 
 
 Post subject: Re: LED CAN Bus Dome light
Posted: Mon Sep 08, 2014 11:36 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

need it playing up -disable switch circuit for any door you need open while testing
allow for time delay to time out........

connect a test light to positive battery terminal with a length of wire -check for earth at interior light in roof connection (blue/black wire)
while still connected to wiring disconnect BEM connections if light stays on check wiring from BEM to all lights (output circuits from BEM to lights) if light goes out start testing switch circuits into BEM -

does forescan show any information for BEM module. example -"doorajar"?

do you have map lights or similar with switches to change them from door/off/on ?
Top
 Profile  
 
 
 Post subject: Re: LED CAN Bus Dome light
Posted: Tue Sep 09, 2014 12:27 am 
Getting Side Ways
Offline

Age: 65

Posts: 1128

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Crestmead
QLD, Australia

TedW,

Ok, I'll do that test and see what transpires. I have not done a full forscan test, there was an error code initially but that related to radiator temperature sensor...I don't have one installed on my radiator expander / filler tank.

I have map lights with separate switches, both were changed to LED some time ago, everything works well , have no problem with map lights or map light switches.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 20 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 12:36 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names