So this one has me stumped.

I am replacing the globe in the clock on the dashboard.
I took it all apart, unplugged everything from the back of the clock, changed the globe and started the car to check it was working, it wasn't obviously because I forgot to plug everything back in.

Once I had plugged everything back in I tried starting the car again to check the globe was working and all I heard was a small "click" from the motor and then everything went dead.

I have no power going to anything anymore ( Interior lights, accessories and no noise from the engine bay ).

If anyone has any idea as to what might be going on it would be greatly appreciated as I currently have 3 out of 4 windows stuck down at the moment.

TIA

(EDIT) I should also add I have checked all the fuses under the dash and they all seem to be ok

Have a look in your engine bay and have a look in the fuse box, there will be a yellow ignition fuse, check that because chances are, that fuse will be blown.

I have 3 greay and 1 light blue fuse? Unless the fuse box in the engine bay is in another areaother than the front right?

It should be the light blue one.

Turns out she was just tired. Gave her a 30 minute break and bam, she started first time!

In all honesty though i have no idea what the problem was lol.