|
Dumpsta |
|
|||
|
Hi guys,
Currently pulling a body loom from a DF Ltd to put in my gli for power windows and courtesy lights etc, I pulled the cap to unplug the fuel pump however there is another wire heading towards the front of the car and back through the wheel arch to the rear. And just my luck, no plug... wondering wth it is and where it goes. Chow. |
|||
Top | |
rustyeb1991 |
|
||
|
sounds like the self leveling suspension controller wires (mounted in front of the fuel tank on the left hand side)
|
||
Top | |
Dumpsta |
|
|||
|
Thats the one as I found out, I ended up cuttibg it where I could join it if needs be. As it turns out, its a high end feature and I didnt need it anyway. The looms are in
|
|||
Top | |
Nigel |
|
||
|
Make sure you pull the SLS fuse, and at least Terminate those wires with heatshrink or something - There will be power to the back if the SLS fuse is in the dash (if you used the high series dash wiring)
Nigel |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 54 guests |