|
ea_falcon |
|
||
|
Would a sports cluster with the extra oil pressure and batterie amp gauge work from an au xr8,Fairlane, fairmont into my 02 xls v8 ? Should I have spare plugs in my loom that will plug I to it ? I did it on my ea Alcon and every thing just plugged in and worked
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
Top | |
Disco Frank |
|
|||
|
should work
will need to change the oil pressure switch for a oil pressure sender
_________________ RIP SCOTT |
|||
Top | |
Esteven8 |
|
|||
|
It will work, but you need to use a AU1 cluster if yours is and AU1 or AU2/3 for 2/3.
There is some re wiring to be done though as it's not plug and play. More info in {DESCRIPTION} AFF thread for S2/3 cluster upgrade. Not sure if it's the same for AU1 though.
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
Top | |
SWC |
|
||
|
Not sure on the V8 but on the 6cyl series II/III, the oil gauge was basicly an idiot light, they ran off the oil switch, not a sender. If you fit a sender they won't work. As I said, I know this is definate for a 4.0L but not sure on the 5.0L.
|
||
Top | |
Disco Frank |
|
|||
|
{USERNAME} wrote: Not sure on the V8 but on the 6cyl series II/III, the oil gauge was basicly an idiot light, they ran off the oil switch, not a sender. If you fit a sender they won't work. As I said, I know this is definate for a 4.0L but not sure on the 5.0L. huh??? how does fitting a sender make it not work??? me confused? damnit i forgot about the smartlock/smartshield with this make the 99 au1's where smartshield so basically if you have a smartlock car get a smartlock cluster and same goes for smartshield
_________________ RIP SCOTT |
|||
Top | |
ea_falcon |
|
||
|
Mines a series 3 I didn't think it would have mattered what series it was, I remember when I did my ea Gli to a spack cluster all the plugs where there and evey thing worked straight swap maybe if this is too much mucking around ill just put a seperate oil pressure gauge in at least I don't have to pull te dash apart then
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
Top | |
Matt_jew |
|
||
|
You need a S1 cluster for a S1 and S2/S3 for a S3.
SWC is 100% correct about the oil gauges. Both the same with the 5.0 and 4.0. It will fit and work but you need to add some wiring into the low series wiring for the right blinker and the dash lighting to work. Its not hard but its not 100% plug and play.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
Top | |
Disco Frank |
|
|||
|
interesting about the blinker and dash lighting
cheers
_________________ RIP SCOTT |
|||
Top | |
ea_falcon |
|
||
|
Aite cheers man is there any post floating around With how to do it ?
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 41 guests |