i have an eb xr8 which is having a 347 stroker being built,this rebuild is costing more than i thought so i can't afford computer mod straight away,so my engine builder wants to put in the old 19lb injectors instead of the 30lb one's i have,he thinks this should be ok to run it in, then when i can afford a tweecer we can then install the injectors,i'm hoping the standard computer will cope with the other mods especially the crower cam part no. 15513 2600-6200rpm,it seemed to cope with the 2031 cam we used in the first rebuild.any thoughts or advice

by the way i will have a crane 2031 cam,acl raceseries flattops,standard crank and rods which have been balanced,crane 1.7 roller rockers and afew other bits and pieces forsale soon if anyones interested

I might possibly be interested in the cam and rockers..

ok i'll let u know in a week or so

how much for the roller rockers

the roller rockers r basically new i bought from ebay and they'd only seen dyno work,the cam my mechanic wants will only suit 1.6 but i'm waiting to see if he finds another cam to suit will know next week or so,they r adjustable aswell so i'm looking around $300 including postage,will let u know wat he decides.