|
| jamie22_cole |
|
|||
|
hey just wondering is there any performance gains or benefits of using au injectors in EL xr6 or are they pretty the same as EF-EL ones?
|
|||
| Top | |
|||
| SWC |
|
||
|
AU injectors have a 4 spray pattern where as E Series injectors are a single jet.There are no performance gains, you will find response a little better and possibly some small improvement in fuel economy due to the better spray pattern.
|
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: AU injectors have a 4 spray pattern where as E Series injectors are a single jet. is there any benefit from using the later models then?? |
|||
| Top | |
|||
| SWC |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: AU injectors have a 4 spray pattern where as E Series injectors are a single jet. is there any benefit from using the later models then?? "you will find response a little better and possibly some small improvement in fuel economy due to the better spray pattern." |
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: AU injectors have a 4 spray pattern where as E Series injectors are a single jet. is there any benefit from using the later models then?? "you will find response a little better and possibly some small improvement in fuel economy due to the better spray pattern." i actually meant later - BA/FG |
|||
| Top | |
|||
| ranga83 |
|
||
|
BA injectors are 29lbs/hr iirc, AU are 19lbs/hr, BA will fit in, but run rich as f**k!
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| bry40l |
|
|||
|
i think the only reason i found a difference in my au injectors being installed is because i gave them a home job clean up before installing them and my original ef ones were probably shagged.
_________________ BF XR6 |
|||
| Top | |
|||
| ranga83 |
|
||
|
i found mine a little bit more responsive on the throttle, but that could have been because of the same thing (clean vs dirty) or it could have been a placebo! lol
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| jamie22_cole |
|
|||
|
so I should just buy some new ones of ebay then. if I were to get some used ones from somewhere does it take much to clean them?
|
|||
| Top | |
|||
| jamie22_cole |
|
|||
|
anyone know a cheap scan tool of ebay for EF-EL?
|
|||
| Top | |
|||
| TyLeR3397 |
|
|||
Posts: 465 Joined: 22nd Jun 2011 |
{USERNAME} wrote: BA injectors are 29lbs/hr iirc, AU are 19lbs/hr, BA will fit in, but run rich as f**k! I thought E series injectors were 19lb/hr and the AU ones were 21? |
|||
| Top | |
|||
| ranga83 |
|
||
|
http://www.bulletperformanceracing.com. ... 20155.html
according to that they are 14lbs/hr but yeah i thought they were 21lbs, but then someone said that was tested at 350kpa, and they would be around 19lbs at 300/275kpa
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Mad2 |
|
|||
|
{USERNAME} wrote: BA injectors are 29lbs/hr iirc, AU are 19lbs/hr, BA will fit in, but run rich as f**k! gottcha 
|
|||
| Top | |
|||
| SWC |
|
||
|
E series are 19lb, AU are 20lb and B series are 29lb.
Au will work wekk with the E series ECU & fuel system, 29lber's will be too big and overfuel the system without the ECU being chipped and the injectors rescaled. |
||
| Top | |
||
| 79 raven |
|
|||
|
{USERNAME} wrote: so I should just buy some new ones of ebay then. if I were to get some used ones from somewhere does it take much to clean them? From memory its about $30 an injector to have them professionally cleaned, but its been a while. Theres a bloke on ebay who has genuine Au injectors refurbished on an exchange basis and will take the E series ones as the exchange. I think I got a set of au's off him for about $100 about 12 months ago, still going strong. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 8 guests |
