i just bought a 044 and it came with no fittings could yous tell me what fittings ill need and also what size hose have you used for your setup id like to keep the same pipe running up the car which goes from 10 ml to 8 ml under the car i believe.
but the guy that sells the speed flow fitting in my town tells me ill need 5\8 line minimum to run this pump. can you shed some light on the subject please. because its for my ef turbo which i have around 400hp flywheel est and i know that the late model ba turbos and xr8s have the same size as my fuel line so why should i need it bigger
also it has a funny looking check valve (i believe its a risidual pressure valve)on the presure side it kind of looks like a banjo fitting but it also has a whole on the end i found a replacement on the speedflow website for it.

this is my surge tank it has 3 8ml fittings and a 10 ml for the outlet to the pump

http://cgi.ebay.com.au/ally-surge-tank- ... 286.c0.m14

any help would be great thanks

http://www.speedflow.com.au/valves.html

CHECK VALVE (Bosch Pumps)

THREADS

PART NUMBER

M12 x 1.5
-6
612-06

M12 x 1.5
-8
612-08

i found these but it looks like i remover the check valve and fit these i want the barb ones can anyone tell me if this is right ill want the 3/8 ones which will fit my fuel lines

thanks for everyones help i found out on my own

http://www.mscn.com.au/scripts/prodList.asp

these guys will have everything you need