Fordmods Logo

coolant from gas mixer 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: coolant from gas mixer
Posted: Fri Sep 08, 2006 6:48 pm 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

should i be worried if i see some green coolant around the gas mixer? i opened up the bonnet and got a bit of a shock. what is the problem?

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 6:54 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

Mixers do leak coolant.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 11:12 pm 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

so nothing to worry about?

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Fri Sep 08, 2006 11:19 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

umm how much coolant?
and wear from?
fromt eh seal or from were teh hose goes in/out?
they are not supposed to leak

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sat Sep 09, 2006 10:56 am 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

like a very thin layer around the edges where the gasket is.

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Sat Sep 09, 2006 8:09 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Means the gasket is ggone, orr going. Time for a new converter or rebuild kit for the old one.
Top
 Profile  
 
 
Posted: Sat Sep 09, 2006 9:56 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

theblackone wrote:
like a very thin layer around the edges where the gasket is.


yer liek twewafdr3q4 said

u can fix it yourself if ya handy... :)

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sat Sep 09, 2006 11:45 pm 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

and if ur not handy..... :P how much would i be looking at


also ... with this new rebate.. if i go for vapour injection... would i be able to get a rebate even though i already have a dual fuel set up?

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Sun Sep 10, 2006 1:10 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

theblackone wrote:
and if ur not handy..... :P how much would i be looking at


also ... with this new rebate.. if i go for vapour injection... would i be able to get a rebate even though i already have a dual fuel set up?


no no rebate asu have gas already

you would need to take car to gas place and get them to remove convertor and look at it

could be a new gasket is all that is needed or a whole new conveter

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sun Sep 10, 2006 1:46 am 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

f**k f**k f**k just wat i need to hear

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Sun Sep 10, 2006 4:40 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

meh how bad is it?

is it leaking lots or just a bit?

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sun Sep 10, 2006 5:50 pm 
Getting Side Ways
Offline
User avatar

Posts: 1552

Joined: 26th Oct 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

u know when you have abottle of..say milk and you open it up and turn the lid and u see like a thin layer of milk on the lid...well thats how much

 

_________________

SIGNATURE REMOVED - REFER TO FORUM GUIDELINES!

Top
 Profile  
 
 
Posted: Sun Sep 10, 2006 11:27 pm 
Getting Side Ways
Offline

Posts: 975

Joined: 15th Nov 2004

Ride: el wagon

Location: melbourne
VIC, Australia

If you are mildly dexterious, most converters are really easy to "recondition", just follow the instructions

Just ask your friendly gas person to get in for you a kit to suit your converter. Be warned, however, converter kits for converters like Landi cost a bomb.( $150+), whereas the converter cost about $700

The cost of a kit for an Aussi B2 is about $70. But it is cheaper than buying a new converter. :)
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: No registered users and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 3:22 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names