Fordmods Logo

ECU Swap 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: ECU Swap
Posted: Tue Nov 15, 2005 8:24 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia

in my posession soon will be a XR6 manual ECU thanks to fern tree auto salvage. is it a staight swap or is there anything else i need to change? i also dont know if my manual tranny has a neutral drive switch as it is from a eb or ed? do i need a neutral drive switch? and can one be installed into my gearbox? any advice would be appriciated.

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST

Top
 Profile  
 
 
Posted: Tue Nov 15, 2005 11:19 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

if u have a manual car and have a manual ecu it is a straight swap!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Thu Nov 17, 2005 10:28 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

yep straight in

the only difference you'll notice is... the 300 odd bux u spent! (unless u have a modded cam)

I have 2XR ECU's and one std I've ran 3 types on the one dyno same results each time (after run in of course)
I found the standard 4DAD ecu runs cleaner and doesn't give me richness when i boot it.
but then again.... I have the XR one in my car coz....its XR

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Thu Nov 17, 2005 11:45 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia

naa i dont realy care mouch for any preformance gain from it i just want the car to run right idle stedy and my fans to run at the right speeds.


coz at the moment i wired in a resistor to the trans temp senstor so the fans arnt running all the time but without them running the car simetimes likes to run a little hotter then it should, so i put a switch in so the fans can be manualy activated (by open circuting tranny temp sensor) . i think the auto ecu needs to see feedback from tranny temp sensor and coolant temp to be able to control fan speeds. not a just fixed resistance from the tranny.

also since i wired in a resistor to tell the car its in drive it runs a lot smoother and better economy but it feels slugish like its lacking torque from take off until it hits a certain rev point where it seems to gain power. hopefully a manual ecu will fix the problem.

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST

Top
 Profile  
 
 
Posted: Fri Nov 18, 2005 10:24 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 516

Joined: 20th Dec 2004

Gallery: 4 images

Ride: EL Manual

Location: S.E. Melbourne
VIC, Australia

Yeah you will find the auto ECU performs torque reduction if the trans temp gets too hot (or the ecu thinks it's so). I wouldn't run it in drive as the ecu will also be putting torque reduction on when the auto ecu tries to change gear.
There is also a whole bunch of other minor stuff manual ecu's do too.

 

_________________

Manual EL Gli.
Mods: Crow Stg3, Chiptorque Dynotune. Lukey Exhaust. DBA slotted rotors, EBC Pads. Whiteline Low Susp. EL GT Swaybars, ROH Envy 17 x235 wheels. Vehicle Datalogger Display V2.0,

Top
 Profile  
 
 
Posted: Fri Nov 18, 2005 3:45 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1104

Joined: 10th Nov 2004

Gallery: 10 images

Ride: Isuzu MU-X ,2018 Kia Cerato

Location: Mackay
QLD, Australia

my car is just a pain in the a** driving through the city hopefully the manual ecu will make it a better car to drive.

 

_________________

'96 DF II LTD 6cy
'15 Isuzu MUX LST

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 8:11 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names