|
| ed1 |
|
||
|
hi there, would someone please help me with a 4.0 ed falcon, it seems to crank over a bit longer than normal before starting , the other day i had to drive down to the shops and when i went to restart it kept cranking over, it cranked quickly like it was about to start but cranked for about 40 seconds, when it started it seemed to run a bit rough for 10-15 seconds, after driving off it seemed to run fine but when i got home it had a slight flat spot off idle, next morning started and drove to work and back with no probs, it is also only returning 390-400 ks a tank is which i thought should be a bit more , any help would be greatly appreciated...cheers
|
||
| Top | |
||
| WhtFairmont |
|
|||
|
how long since injectors had a clean? My ea did a similar thing and the lead came off in my hand when I went to check the plug. Check both.
_________________ EF Fairmont Ghia
|
|||
| Top | |
|||
| ed1 |
|
||
|
anyone else have any suggestions? , any plugs or relays that can play up on this model ????????
|
||
| Top | |
||
| FPV FAN |
|
||
|
i reckon ur fuel pump could be on the way but heaps of stuff can do that. but fuel pump is my guess. my mums ed did that then the pump failed but now its been changed no probs
|
||
| Top | |
||
| ed1 |
|
||
|
hi , does anyone know how i would test the oxy sensor to make sure its ok?is there anything else to check? , thanks
|
||
| Top | |
||
| KRUPTD |
|
||
|
Have a look at your engine coolant temp sensor.This gives the same effect when its hard to start,keeps whining over then eventually starts,then runs rough because of the injectors floodin up the plugs.See how you go.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| ed1 |
|
||
|
thanks guys , also would it be worth my while to try and reset the ecu? if so is it a matter of just disconnecting the battery for 15 mins?, when i put my fingere over the end of the pcv the engine idles slower and seems to run better, then when i plug it back into the tappet cover the revs rise again
|
||
| Top | |
||
| Benji |
|
|||
|
I had an issue with my fuel pressure regulator, similar issues.
Ben |
|||
| Top | |
|||
| ed1 |
|
||
|
thanks mate you were spot on with the temp sensor , it was actually the plug that was fitting loose on the 2 prongs, closed the connectors up and now running perfect , thanks to all
|
||
| Top | |
||
| KRUPTD |
|
||
|
No problem,its good that you found the problem and rectified it.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
