hi all, just after a rough price i should be looking at 4 injectors 4 a I6 & what are the better ones 2 get or a good mechanic in adelaide who can kleen mine.

cheers 2 all on helping me find problem with me car.

when i last enquired they were about $90 new from ford, repco can do a full set or them exchange for $250

i only payed bout $150

I wish mine were that cheap.

found a good price off a mate on second hand just been cleaned $100 inc fuel rail.

cheers for all the help.

Check this out

6 X FORD XR6 INJECTORS suit EB,EF,EL

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 81417&rd=1

Soak the injectors in raw cleaner , bottle is e about $10.00 , remove the rubbers or they swell , rebuild kits run $11.00 for two injectors so you need 3 , I get mine from bursons , get some 1/4 " fuel hose and place in an injector nozzle after 12 hours of soaking .
you should use a stable power supply or battery and an old injector connection to apply 12 volts to the operating part and the injector will click open , apply low preasure air throu the fuel line on the nozzle and you will get all the junk blowing back out of the injector ,
Add new orings and caps with a drop of oil and there you go clean healthy injectors , add the rest of the new cleaner to your tank and have fun . this will save you over $100.00 for an hours work .
good luck ( dont swallow any cleaner)