|
| BenJ |
|
||
|
As Troyman has stated, there should be two Red with Blue Trace wires going into the BEM/Smartlock Module. One of them comes from the Ignition switch, the other goes to the starter motor. All you do is join them together to bypass the BEM.
BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Glowing EF |
|
||
|
I've got 1 red wire with a white trace and another with a yellow which is for the airbag, I don't have any blue wires at all do you think that they might've changed the wire colours before bcm
|
||
| Top | |
||
| BenJ |
|
||
|
There are multiple plugs in the BCM. Are you sure you are looking at the correct one?
BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Glowing EF |
|
||
|
Ef only has 1 EB and Ed have multiple
|
||
| Top | |
||
| TROYMAN |
|
||
|
both ef diagrams i have show the wires as red/dark blue..
|
||
| Top | |
||
| fiend |
|
|||||
|
TROYMAN wrote: both ef diagrams i have show the wires as red/dark blue.. BenJ wrote: As Troyman has stated, there should be two Red with Blue Trace wires going into the BEM/Smartlock Module. One of them comes from the Ignition switch, the other goes to the starter motor. All you do is join them together to bypass the BEM.BenJ You mean these two wires labelled RED with DARK BLUE on the circuit diagram that I just viewed from the post previously? You just right click and open in new tab or ZOOM IN or whatever tickles your fancy and there they are. It's not that tricky. They are probably the same damn circuit diagram that Troyman has. Glad to have been useful. 
|
|||||
| Top | |
|||||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
