|
| mistymtn |
|
||
|
Hi guys
i have an EF with a problem with the throttle position sensor how do you tell what position the tabs on the inside of the sensor need to be when you put it back on the throttle body?? there seems to be a few positions it can be!! thanks in advance Mistymtn |
||
| Top | |
||
| Dellboy999 |
|
|||
|
I think the plug end faces towards the motor, just sort of put it on (wiggle slightly) so it fits on easily and nicely, check the throttle operation by hand to make sure it works freely.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| mistymtn |
|
||
|
It seems to be on ok
but my transmission doesn't change gears properly it won't change it to top gear at all & the others it won't change until it hit 3500rpm & changes down hard also like when an older models kick down was stuffed do i need to replace the sensor or is it just the position of it?? thanks Mistymtn |
||
| Top | |
||
| uglybob |
|
|||
|
hehe sounds like you've done what i did to about 2 x TPS's! i managed to wind it back over on itself - the sensor then doesn't read correctly, and will do exactly what you're describing! they aren't cheap either - ~$110 trade price i think
lol i'm on a self-imposed ban from touching TPS's anymore 
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| mistymtn |
|
||
|
GEE!!! thanks uglybob
not a cheap exersize first a new harmonic balancer now this i'm having so much fun!!!!!
Mistymtn |
||
| Top | |
||
| Waggin |
|
|||
|
I've got a few laying around the garage if you want one.. tested and confirmed working.. $45 inc post.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
To test TPS:
Igntion on not sure which wire (i know its green on an EA) has to be checked with a mutlimeter + (positive lead) ground out the negative lead, and the voltage will 0.7 at closed throttle and upto 4.5 at WOT, if its higher then 0.7 you will get what you have described 
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| uglybob |
|
|||
|
mistymtn wrote: GEE!!! thanks uglybob
not a cheap exersize first a new harmonic balancer now this i'm having so much fun!!!!! Mistymtn well, it sounds like you've stuffed the TPS - lol as i've done exactly the same twice over! haha maybe do like me - just don't touch them in future! 
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| mistymtn |
|
||
|
yeah sounds like a good idea not to touch them:roll:
played with older cars for years, everytime i touch this one i end up stuffing something on it & it's not as cheap & easy to repair 
all the same components just need to be more careful i think 
Mistymtn |
||
| Top | |
||
| Dellboy999 |
|
|||
|
You could drill out the holes on an EA/ED tps mod the plug and fit one, and get it within spec of 0.7 to 4.5max to get out of trouble if you really get stuck.
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| mistymtn |
|
||
|
YOU GUYS ARE LEGENDS!!!
Installed a new tps & recalabrated the auto& very happy to say it's all running fine thank you so much for your wisdom & knowledge Cheers Rob 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
