|
| falconea |
|
||
|
Maybe MAP sensor check wiring and that the vac pipe is connected.
Are there any fault codes on the ECU???????????????
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| wadesta_1986 |
|
|||
|
Ok, Will give that a shot.
By the way, was any one able to confirm that there are 12 different ECU's? I personally dont believe the guy but at the same time, I dont want to go wasting money!! |
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
falconea wrote: Maybe MAP sensor check wiring and that the vac pipe is connected.
Are there any fault codes on the ECU??????????????? How would I check for fault codes. I know where the diagnostics plug is but what would I be able to use to check for codes? |
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
falconea, I dont know who you are, but I do know this about you...... YOU A BLOODY LEGEND!!!! As stated, there was a stray vac hose from the MAP sensor. Bust of happened when I was unbolting the starter motor! Thank you all for your help!! I will still be looking out for a XR Man Ecu, So If you hear of any, feel free to let me know!
|
|||
| Top | |
|||
| falconea |
|
||
|
Hey, I am just glad I could help. Some times things just pop into your head and it helps someone. Will let u know if I hear of an ECU.
Good luck
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| Dellboy999 |
|
|||
|
I knocked my vac hose doing something similar
well with Vac hose on, and set to neutral you should be laughing now
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| data_mine |
|
|||
|
I'd beleive there's 12 ECUs. But as I said you really only need one that's EL, XR, and Manual. Any 'versions' of that won't matter.
Here's a few types for ya. EL, I6, Auto EL, I6, Auto, Cop (Chaser) EL, I6, Manual EL, XR6, Auto EL, XR6, Manual Don't know if there's a cop version of all of them. So yeah I could see 12 being possible.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Spork |
|
|||
|
Another thing with converting from auto to manual is to make sure the trans temp sensor input is reading 'normal' and the range selector thinks it is in neutral.
Otherwise the ECU will try and perform torque reduction (timing retard) at the auto shift points. Result is funny power dips as you accellerate. Also if the trans temp input is reading too hot it tries to restrict engine power. At the end of the day best to get a manual ECU since all the little adjustments will be in there to make it run better. Mine does idle adjustments with the clutch in when it is cold to help with stalling.
_________________ Manual EL Gli.
|
|||
| Top | |
|||
| wadesta_1986 |
|
|||
|
Yep, done all the trans temp and gear pos stuff. Runs bloody well I must say. Its driving really smoothly and the idle seems to be quite good. I am extremley impressed with the amount of power that the manual is delivering compared to the auto. Its giving me a real buzz driving it!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 32 guests |
