|
Mont5.0 |
|
|||
|
G,day all.
New here and was wanting to find out some info hopefully from peoples that are or have run this set up. I am currently building a 2 litre pinto engine for my escort. The car will not be registered, and used for cheap drag racing events only. The engine is going to be Turboed and EFI. My question is- what would be the best computer package (system) to run this engine. And what prices for any recommended systems. I know the questions are a bit non descript- but i am starting from scratch, so would like suggestions from persons who have run this combo before. Cheers in advance. Mont5.0 |
|||
Top | |
67RCE |
|
||
|
How much are you willing to spend and what features do you want?
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
Mont5.0 |
|
|||
|
The cost at this stage is not really an issue. I am looking for an ecu that will run the injection and is quite east to tune (for a tuner).
|
|||
Top | |
xfpaul |
|
||
|
give wolf a ring, best move i made v500 does everything , ask for robbie
_________________ NC2 Fairlane AU2 Intech 4.0 Wolf V500 ECU Accel 500cc Injectors Eaton M90 Blower MPx Porting 75mm Mustang TB Intercooler Holley 255lph EL XR6 Rear End 3.45 LSD Duel Fuel lots more. |
||
Top | |
67RCE |
|
||
|
Do you want to control fuel and spark or just fuel? Look at either Link, Autronic or EMS for a good affordable ECU or Motec for top of the line uber tuneable s**t
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
N1TRO5 |
|
||
|
Hey buddy, i'd recommend all the microtech gear. we've got a V8 drag car escort running it and it may not be the cheapest but it is definatly the best. If your in Sydney, i'd give Mark Heysmand a call from Injection Perfection. He's the guru with all that sorta stuff.
Good luck mate and hope to see sum pictures, http://www.microtechefi.com/ http://www.injectionperfection.com.au/ (the phone numbers are on the site) |
||
Top | |
67RCE |
|
||
|
IMO, find a tuner first and use an ECU that they are willing to work with
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
Dr_Hoon |
|
||
|
It depends on the sensors of your injection and ignition setup.
What sort of ignition do you want? Individual coil per spark plug? Most ECUs will run sequential injection and ignition for 4 cylinder configurations, so that is less of a hassle. Do you want boost control? Drag style antilag? Lastly, and most importantly, do you want closed loop (lambda control), which you need if you want it to be legal? Are you running late model DOHC gear? Aftermarket, ie weber-style thottle body or single throttle body? The less featured ECUs will go for about $1000 plus add ons (MAP sensor, boost control, 02 sensor, etc) and tuning. Mid-range and good value for money ECUs for around 1600-1800 plus tuning. Top of the range for 3000 plus, ie MoTeC, and again tuning and accessories.
_________________ BF XR6 Ute,ED XR6 Manual (SOLD),XD 4V 351 toploader 9in |
||
Top | |
Dr_Hoon |
|
||
|
Also before I forget, issue 39 of Street Fords featured Mark Freeman's turbo'd DOHC RS2000 MK2 Escort making 242rwkw. It was managed by an Autronic SMC ECU and 500R CDI ignition system.
Check out the online gallery: {DESCRIPTION}
_________________ BF XR6 Ute,ED XR6 Manual (SOLD),XD 4V 351 toploader 9in |
||
Top | |
Mont5.0 |
|
|||
|
{USERNAME} wrote: Lastly, and most importantly, do you want closed loop (lambda control), which you need if you want it to be legal? I am not sure what i want or need as i am new to this, but it will not be regoed. {USERNAME} wrote: Are you running late model DOHC gear? Aftermarket, ie weber-style thottle body or single throttle body? I have included a pic of my motor and efi set up, (obviously- the weber and mani, wont be there) |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 24 guests |