Fordmods Logo

fitting a kill switch 

 

Page 2 of 2 [ 19 posts ] Go to page Previous  1, 2

 
 Post subject: Re: fitting a kill switch
Posted: Mon May 24, 2010 9:42 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

{USERNAME} wrote:
Pin 22 Fuel Pump Control
Ignition ON....................................................... 12 Volts
Engine Running................................................ >1 Volts


thanks Very Much
?

im not sure what your getting at
but the wire from the ecu is a negative trigger to the relay.. as i have this wire connected to an earth to run the pump constantly when ignition is on, as i have bypassed the ecu fuel pump control..
Top
 Profile  
 
 
 Post subject: Re: fitting a kill switch
Posted: Mon May 24, 2010 9:55 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 580

Joined: 9th Sep 2009

Ride: EF Falcon GLi

Location: ADELAIDE
SA, Australia

Can ya just switch the ECU's earth man??

 

_________________

Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake!
SHAKE AND BAKE

Top
 Profile  
 
 
 Post subject: Re: fitting a kill switch
Posted: Mon May 24, 2010 9:57 pm 
Stock as a Rock
Offline
User avatar

Age: 49

Posts: 155

Joined: 7th Nov 2004

Ride: EB Fairmont Turbo

Location: Wynyard
TAS, Australia

FORD FALCON EL 4.0L (H and X Engines) 1996-97 Engine Management System
FORD FAIRLANE NL 4.0L (H and X Engines) 1996-97 Engine Management System
FORD LTD DL 4.0L (H and X Engines) 1996-97 Engine Management System
(Includes Factory LPG Systems)

PCM Voltage Table


Pin # Circuit and Status........................................... Voltage

1 Keep Alive Power

All Times.......................................................... Battery Volts

3 Vehicle Speed Sensor (Use Scope to test)
Vehicle Moving................................................. 0 to 10 Volts Square Wave

4 Engine Immobilisation (Smart Lock)
All Times.......................................................... 0 to 12 Volts Signal

5 Key Power
Ignition ON....................................................... 12 Volts
Engine Running................................................ 12 to 14.5 Volts

7 Engine Coolant Temperature Sensor

Ignition ON
Engine Coolant @ 20°C..................................... 3.1 Volts
Engine Coolant @ 40°C..................................... 2.2 Volts
Engine Coolant @ 100°C................................... 0.5 Volts

8 Fuel Select (Factory LPG)
Ignition ON
Petrol Mode selected........................................ >9.0 Volts
LPG Mode selected.......................................... 0 Volts

10 A/C Clutch
Engine Running
A/C ON............................................................ <1.0 Volts
A/C OFF.......................................................... Battery Volts

11 Lock Up Solenoid (Solenoid #7)
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

12 Economy Indicator Lamp
Ignition ON
Normal Selected............................................... >10 Volts
Economy Selected............................................ 0 Volts

13 Liquid Petroleum Gas (LPG) Cut Off Solenoid
Ignition ON
LPG ON........................................................... 0 Volts
LPG OFF......................................................... 12 Volts

14 Line Pressure Control Solenoid (Solenoid #6)

Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

15 Broadband Manifold

Ignition ON....................................................... 12 Volts
Engine Running < 3800 RPM............................. 0 Volts
Engine Running > 3800 RPM............................. Battery Volts

16 Ignition Ground
All Times.......................................................... 0 Volts

17 Self Test Output
Ignition ON....................................................... Battery Volts
Engine Running................................................ Battery Volts

20 Case Ground
All Times.......................................................... 0 Volts

21 Idle Speed Control (Use Scope to test)
Ignition ON....................................................... 12 Volts
Engine Running................................................ 8 to 11 Volts

22 Fuel Pump Control
Ignition ON....................................................... 12 Volts
Engine Running................................................ >1 Volts

23 Knock Sensor
Ignition ON....................................................... 3 Volts
Engine Running................................................ 3 Volts

25 Intake Air Temperature Sensor
Ignition ON
Intake Air Temperature @ 0° C............................ 3.9 Volts
Intake Air Temperature @ 20°C.......................... 3.1 Volts
Intake Air Temperature @ 40°C.......................... 2.2 Volts

26 Voltage Reference
Ignition ON....................................................... 5 Volts
Engine Running................................................ 5 Volts

27 Pattern Select (Normal/Economy)
Ignition ON
Normal Mode.................................................... 9 to 12 Volts
Economy Mode................................................ 0 Volts

28 Power Steering Pressure Switch
Ignition ON
Engine Running................................................ 0 Volts
No Power Steering Load.................................... 0 Volts
With Power Steering Load................................. 12 Volts

29 Oxygen Sensor Signal
Engine @ Operating Temperature
Ignition ON....................................................... 0 Volts
Engine Running................................................ 0.1 to 0.8 Volts Switching

30 Transmission Range/Neutral Drive Switch (Automatic Transmission)
Ignition ON....................................................... 3.8 to 4.2 Volts
Park................................................................ 3.3 to 3.7 Volts
Reverse............................................................ 2.8 to 3.2 Volts
Neutral............................................................. 2.3 to 2.7 Volts
Drive................................................................ 1.8 to 2.2 Volts
3..................................................................... 1.3 to 1.7 Volts
2..................................................................... 0.8 to 1.2 Volts

30 Transmission Neutral Switch (Manual Transmission)
Ignition ON
Neutral............................................................. 0 to 0.1 Volts
In-Gear............................................................. 5 Volts

31 Canister Purge Solenoid
Ignition ON....................................................... 12 Volts
Engine Running................................................ 8 to 10 Volts

32 Gas Shut Off (Factory LPG)
Ignition ON
LPG OFF......................................................... 12 Volts
LPG ON........................................................... 0 Volts

33 Engine Cooling Fan #2
Ignition ON
Engine Running................................................ 12 Volts
Relay 2 & 3 OFF............................................... 12 to 14.5 Volts
Relay 2 & 3 ON................................................ 0 Volts

34 Data Output Link (Use Scanner)
Ignition ON....................................................... 0 to 12 Volts Pulse Wave

35 Multiplex Control Solenoid (Solenoid #3)
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

36 Spark Out (Use Scope to test)

Ignition ON....................................................... 12 Volts
Engine Running................................................ 6 to 7 Volts Average

37 Vehicle Power
Ignition ON....................................................... Battery Volts

38 Variable Pressure Solenoid (Solenoid #5) (Duty Cycle used)
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts
PID read in mA................................................. 0.2 to 1.275 Amps

39 Speed Sensitive Power Steering (Use Scope to test)

Ignition ON....................................................... 12 Volts
Engine Running................................................ 0 to 12 Volts Pulse Wave

40 Power Ground
All Times.......................................................... 0 Volts

41 Air Conditioner Compressor

Ignition ON
Engine Running................................................ 0 Volts
A/C Clutch Engaged.......................................... 12 to 14.5 Volts
A/C OFF.......................................................... 0 Volts

42 Transmission Oil Temperature
Ignition ON @ 20°C........................................... 3.6 Volts
Engine Running @ Normal Operating Temp......... 1.0 to 3.6 Volts

43 A/C Evaporative Air Temperature
Ignition ON
Temperature @ 20°C......................................... 1.5 to 2.0 Volts

44 Blower Fan Speed
Ignition ON
Fan Switch @ Position 1................................... 3.6 Volts Approx.
Fan Switch @ Position 2................................... 5.6 Volts Approx.
Fan Switch @ Position 3................................... 7.9 Volts Approx.
Fan Switch @ Position 4................................... Battery Volts
Climate Control................................................. Varies with Fan Speed

45 Manifold Absolute Pressure Sensor
Ignition ON....................................................... 155 to 160 Hz
Engine Running................................................ 100 to 105 Hz

46 Signal Return
All Times.......................................................... 0 Volts

47 Throttle Position Sensor
Ignition ON
Closed Throttle................................................. 0.55 to 0.85 Volts
Wide Open Throttle........................................... 4.0 to 4.5 Volts

48 Self Test Input
Ignition ON....................................................... 12 Volts

49 Oxygen Sensor Ground
All Times.......................................................... 0 Volts

51 Gear Select Solenoid 1
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

52 Gear Select Solenoid 2
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

53 Engine Cooling Fan #1
Ignition ON
Engine Running................................................ Battery Volts
Relay 1 OFF..................................................... Battery Volts
Relay 1 ON...................................................... 0 Volts

54 Air Conditioner (WAC) Relay
Ignition ON, A/C OFF
Engine Running................................................ Battery Volts
A/C OFF.......................................................... Battery Volts
A/C ON............................................................ 0 Volts

55 Multiplex Control Solenoid 2 (Solenoid #4)
Solenoid Energised........................................... Low Volts
Solenoid Not Energised..................................... Battery Volts

56 Profile Ignition Pick Up (Use Scope to test)
Ignition ON....................................................... 0 to 12 Volts
Engine Running................................................ 6 Volts Average.

57 Vehicle Power
Ignition ON....................................................... Battery Volts
Engine Running................................................ Battery Volts

58 Injector #1, 3 and 5 (Use Scope to test)
Ignition ON....................................................... Battery Volts
Engine Running................................................ Voltage Pulse

59 Injector #2, 4 and 6 (Use Scope to test)
Ignition ON....................................................... Battery Volts
Engine Running................................................ Voltage Pulse

60 Power Ground
All Times.......................................................... 0 Volts



I hope this clears some information for ya all

 

_________________

EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come

Top
 Profile  
 
 
 Post subject: Re: fitting a kill switch
Posted: Mon Jun 07, 2010 9:56 pm 
Tyre Shredder
Offline

Age: 34

Posts: 326

Joined: 3rd Nov 2009

Ride: AUII XR8 Pursuit & EF XR6

Location: Albion Park
NSW, Australia

Just on the subject, my XH previously had a wire going from the neg wire on the coil to a switch under the dash, what would this do?? Kill switch?? Its now disconnected but was just curious.

 

_________________

- 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot )
- 2001 AUII XR8 Pursuit ute, 5 speed, 18" alloys, custom tray. Goes alright!! lol

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 19 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 10:48 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names