|
| justfordima |
|
|||
|
email sending and probably sent by the time I write this.
Have fun! at jaycar the parts for it cost me ~$20... the most expensive part is the pots. Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| glenneaux |
|
||
|
yeah in that time i put together the parts list at DSE for $17
that includes a 5 pack of 9v battery clips  . only problem is i need veroboard which is a good $20 or so  --edit just checked, a small piece is like 5 bux
heh oh well i'll put a stim together when i get closer to having the kit! thanks guys!! |
||
| Top | |
||
| Hyena |
|
|||
|
Yeah you only need a $5 bit of veroboard. This is how mine turned out
I actually ordered the parts from glens garage but didn't get the circuit board. I was cost cutting at the time and figured it looked like a simple circuit board to make up, but even so it's alot of stuffing around, drilling holes and bending the legs of various components to get them to fit 
_________________
|
|||
| Top | |
|||
| justfordima |
|
|||
|
did that 37 pin PCB connector come from glens garage? Cos teh cheapest one here in australia was $20 (for one), from RS components.
Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| unclewoja |
|
||
|
justfordima wrote: did that 37 pin PCB connector come from glens garage? Cos teh cheapest one here in australia was $20 (for one), from RS components.
Cheers I assume that price of $20 includes freight because my price from RS is $5.94 each |
||
| Top | |
||
| glenneaux |
|
||
|
http://www.jaycar.com.au/productView.as ... &SUBCATID=
http://www.jaycar.com.au/productView.as ... &SUBCATID= $3.95 a piece. Search for D 37 not DB37. D 37 brings up hits on farnell too.. (but farnell is 5 per item minimum) |
||
| Top | |
||
| Hyena |
|
|||
|
Yep, I bought all the components from glens garage and assembled them on veroboard.
For $18 US it's well worth it to save the stuffing around of sourcing all the individual parts locally
_________________
|
|||
| Top | |
|||
| glenneaux |
|
||
|
damn just had a quick read and i think i've realised that TFI ignition isn't supported with the MSII yet. Only the MSnS extra. damnit..
Do i need ignition control or could i just leave the EEC handling it? When it comes to turbo can i just manually retard it by rotating the dizzy or something or does that have to be handled in the MS? Damn 
|
||
| Top | |
||
| justfordima |
|
|||
|
TFI is supported... have a look through the MSII and V3 section of the forums.. there's a guy running the ford TFI. And lance chucked up an information on how to hook it up.
Very easy. And if you don't wanna use the TFI module, you always have the high current IGBT driver, which allows you to drive the coil directly using the VB921's. Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| EFFalcon |
|
|||
|
spart timing is one of the more important aspects of tuning with boost.
retard the dizzy and you'll end up with crap responce offboost but safe onboost timing, other way will have good reposnce by it'll ping its nuts off.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| unclewoja |
|
||
|
glenneaux wrote: http://www.jaycar.com.au/productView.asp?ID=PS0864&CATID=&keywords=d+37&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumber=&priceMin=&priceMax=&SUBCATID=
http://www.jaycar.com.au/productView.as ... &SUBCATID= $3.95 a piece. Search for D 37 not DB37. D 37 brings up hits on farnell too.. (but farnell is 5 per item minimum) Yeah, but you need a PCB mount D37 connector. The jaycar site doesn't say that's it's a PCB mount connector. |
||
| Top | |
||
| justfordima |
|
|||
|
yeah, they don't have the PCB ones.. I checked. I used just that connector, and ran 37 wires.. (pain in the a** lol).
Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| unclewoja |
|
||
|
justfordima wrote: yeah, they don't have the PCB ones.. I checked. I used just that connector, and ran 37 wires.. (pain in the a** lol).
Cheers You only need about 6 or 5 if you're using it for the stimulator... |
||
| Top | |
||
| justfordima |
|
|||
|
not just stimulator, but yeah, I only hooked up the needed ones for the stim.
Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| r00fi |
|
|||
|
Quote: $3.95 a piece. Search for D 37 not DB37. D 37 brings up hits on farnell too.. (but farnell is 5 per item minimum) Radio Parts - Melbourne CBD - less than $5 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
