|
| TROYMAN |
|
||
|
hello again
i have a question.. im trying to connect a knock sensor to a el ecu in my ea.. from what i can work out the yellow/red wire goes to pin 23 +3v and i guess the plain yellow wire goes to signal ground.. can any one confirm this??? i dont want to blow the ecu!! or do any unecessary damage.... |
||
| Top | |
||
| fordzatmyplace |
|
||
|
according to my gregorys,
the yellow red does go to pin 23. The other (my manual says Black White???) Is a common gound signal that all things like the TPS, Map sensor, Coolent temp sensor are also wired to. You can find this black white wire at pin 46 on the ECU as well The manual also says that the two knock sensor wires should be shielded in similar fashion to the TFI module wires are as well
_________________ ^^^ What He Said
|
||
| Top | |
||
| TROYMAN |
|
||
|
hi
thanks for that.. i connected the wires up that way and so far so good.. i dont know if its related but the idle quality has improved greatly since the knock sensors has been conected.... |
||
| Top | |
||
| twase |
|
|||
|
TROYMAN wrote: hi I guess without the knock sensor it will default to a safe point. Not surprised it idles better but I would be more interested in seeing the performance increase by having it wired.
thanks for that.. i connected the wires up that way and so far so good.. i dont know if its related but the idle quality has improved greatly since the knock sensors has been conected....
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
hi
i havent drove it real hard yet but i think i can now advance the timing a little more.. before i put the knock sensor on it would only ping at low revs under load i havent touched the timing yet but there is no sign of any pinging under load so far.. |
||
| Top | |
||
| fordzatmyplace |
|
||
|
glad to hear its working out for you mate
_________________ ^^^ What He Said
|
||
| Top | |
||
| TROYMAN |
|
||
|
yea its much better now
i just drove from sydney to south coast about 350kms and it ran great... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 40 guests |
