hey guys,

im new to this so bare with me, ill try my best =). i have connected up an innovate LM-1 and LMA-3 to my eb fairmont, i got AFR, RPM, MAP, and water temp working right, but i am getting a a weird reading for the TPS.

ive just spliced and connected a wire to terminal 47 of the wiring loom, and ran it straight to the lma-3. and all im getting is a constant 0.03v - 0.04v reading. i was told that it should be around 4.4v Wide Open Throttle and 0.7V closed throttle? not sure what i am doing wrong.

for the speed sensor, i am under the impression that it is a 10v square wave signal. is their a way to connect this to the lma-3. has anybody else tried this?

any help would be appreciated,

cheers, joe