Hi to everyone im after a set of 4 or just the front coil springs to suit a EF fairmont,but i need the ones out of a EF or EL tickford xr6 they have to be the standard tickford hight.As i got pulled over yesterday by the cops and put my ef fairmont of the road for been to low i only got KING LOWS it has to be 100mm clearence of the ground and its about 10mm out i reckon if i was out of my car it would have been OK. AND would anyone know maybe i can buy some spacers to put on if anyone knows please give me a address or a phone number,and if possible a price as well.Also im after a EF XR6 LSD with 4:45 gear ratio,it has to be EF not a EL repeat NOT A EL as the upper control arms are a bit longer.Need responce A.S.A.P as i got 1 week to get a roadworthy or they gonna susspend my rego.Get this i got a pair of alteza tail lights and they said that they are not legally are they for real?????? THANKS PETER.. if anyone needs to ring me my number is 0419 311 298

you can fit an el diff if you use el top arms,think your looking for a 3.45 ratio too. rear lights need to have a red reflector and most altezzas dont.

You'll also need the hand brake cables, and even the watts link arms (not sure if they're shorter)

Its a worthwhile swap from EF to EL as the rear handling is optimized.

and Yes, 3.45:1

I have 10mm spacers above my rear springs, as I found the S/Low's too low.

You should be able to order them from any suspension store. They were $30.

And yes, you can use either the EF or EL XR6 diff, as long as you get the matching upper control arms.

BenJ

Hi and thanks for the quick reply i have asked everywere for the spacers and no one seems to have were did you get yours any chance you can give me a address and a phone number??? OR even if you can buy them for me and i will send you the money,or you can give me your bank account details and i will bank the money first thing in the morning.Or if theres is another way that you want me to pay you i will,i need the same as yours about 10mm will be perfect.If you need to ring me my number is 0419 311 298 or you can leave me youre number.Thanks heaps Peter...

Hi and thanks for the quick reply i have asked everywere for the spacers and no one seems to have were did you get yours any chance you can give me a address and a phone number??? OR even if you can buy them for me and i will send you the money,or you can give me your bank account details and i will bank the money first thing in the morning.Or if theres is another way that you want me to pay you i will,i need the same as yours about 10mm will be perfect.If you need to ring me my number is 0419 311 298 or you can leave me youre number.Thanks heaps Peter...