|
| EFFalcon |
|
|||
|
i just realise the idle issue may be related to the map sensor vacuum line being 'borrowed' for the new map sensor.
thus giving it a false reading (WOT reading), and from what i've heard, @ WOT the ISC is wide open, which could make sense. spose i'll have to get another vac line for the 2nd map sensor or try unplugging the factory map sensor from the ECU
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
well... unplugged MAP sensor and its flawless
been driving it around today and it seems to be running alright, deffinately needs a tune (more advance it seems) but theres no pinging and its smooth etc. so simple!
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| sickd |
|
|||
|
so is there still a problem with firing order or was it just the map sensor, cos i have a edis6 module that i am gonna install with ms and would be great to no thanks.
and well done its good to here ppl getting this stuff working nfghia and now you its great, keep up the work very impressed. 
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| EFFalcon |
|
|||
|
firing order didnt seem to matter.
i matched EDIS6 module wires to the EF coil pack wires (same colour) and it seems to be running fine. the leads are matched depending on the firing order of the engine, nothing to do with the EDIS module. yeah its great to be able to try this stuff and allow others to see the problems encounted and resolved, makes it easier for those in the future.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
the idle seemed to pick itself back up and was running too high again. so it seems all the sensor are very relied on by the ECU.
so now the factory map sensor is connected up. all factory sensors are getting their expected signals (except maybe the crank angle sensor) but the cars running perfectly fine now. idle is as it used to be and car drives good. for some reason the petrol side of the car doesn't work though. if i connect the factory stuff back up its fine, but with the new timing maps and 1 sensor piggy backed the car just stalls. unsure why this is but i don't care 
my cars going straight LPG so this will just make me get used to having to fill up before it runs out.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| glenneaux |
|
||
|
maybe you're running into the same problem as NFGhia.. remember these things werent designed to share alot of the data... more importantly the PIP signal from the ignition.......
maybe try what nfghia did.. wire up a transistor on it?? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
