New ECU possibly - www.fordmods.com

Home » Forums » Fordmods Tech » ECU, Fuel System and Tuning Forum

New ECU possibly

Page 1 of 1 [ 8 posts ]

Post New Topic Post Reply

Previous topic Next topic

Kayden

Post subject: New ECU possibly

Posted: Mon Dec 18, 2006 6:10 pm

Oompa Loompa

Offline

Age: 43

Posts: 47

Joined: 31st Oct 2006

Ride: ED Fairmont

Location: Melton
VIC, Australia

Quick question for everyone that knows more about the E series ECUs than I do (which is probably most of you).

Currently in the for sale section - ED XR6 Auto ECU.

I drive a 93 ED Fairmont, Unichip attached, quite a bit of engine work.

I'm mainly wanting to know whether this ECU would be a straight plug and play with my car. Not sure whether the XR unit is a straight replacement for the Fairmont.

I'm hoping so, I need to ditch the speed limiter (will only exceed 180 on dyno or track).

_________________

Speed. Is there anything that compares?

Top

Profile

xf_xr6

Posted: Mon Dec 18, 2006 8:19 pm

Smokin em up

Offline

Posts: 244

Joined: 29th Oct 2005

Location: Perth
WA, Australia

it would probably be worth it if you didn't have the uni chip, but i cant imagine it giving much more performance or driveability. Could be wrong though...

Top

Profile

Kayden

Posted: Mon Dec 18, 2006 8:28 pm

Oompa Loompa

Offline

Age: 43

Posts: 47

Joined: 31st Oct 2006

Ride: ED Fairmont

Location: Melton
VIC, Australia

I wan't really thinking of it power wise - more for different positioning for the gear changes (not sure if this is so or not) and to ditch the limiter.

_________________

Speed. Is there anything that compares?

Top

Profile

EL XR8

Posted: Mon Dec 18, 2006 8:36 pm

Getting Side Ways

Offline

Age: 41

Posts: 2351

Joined: 11th Nov 2004

Gallery: 30 images

Ride: Blown XR8

Location: Melbourne
VIC, Australia

I'm not sure about the ECU, but before someone else says it... the limiter on the stocko ECU is mainly because of the stock tailshaft. If you have an XR alloy one, then it would be fine to get rid of the limiter.
Otherwise it can be pretty dangerous.

Top

Profile

Kayden

Posted: Mon Dec 18, 2006 8:58 pm

Oompa Loompa

Offline

Age: 43

Posts: 47

Joined: 31st Oct 2006

Ride: ED Fairmont

Location: Melton
VIC, Australia

Yep

Switching out the steel one for the alloy.
Should be good for about 220kmh.

_________________

Speed. Is there anything that compares?

Top

Profile

xf_xr6

Posted: Mon Dec 18, 2006 9:04 pm

Smokin em up

Offline

Posts: 244

Joined: 29th Oct 2005

Location: Perth
WA, Australia

{USERNAME} wrote:

I wan't really thinking of it power wise - more for different positioning for the gear changes (not sure if this is so or not) and to ditch the limiter.

pretty sure the ed's have a seperate computer for the auto anyway...

Top

Profile

Kayden

Posted: Mon Dec 18, 2006 9:29 pm

Oompa Loompa

Offline

Age: 43

Posts: 47

Joined: 31st Oct 2006

Ride: ED Fairmont

Location: Melton
VIC, Australia

Damn. Thought it was controlled by the ECU.

_________________

Speed. Is there anything that compares?

Top

Profile

xr8ute

Posted: Mon Dec 18, 2006 10:01 pm

Getting Side Ways

Offline

Age: 44

Posts: 661

Joined: 2nd Dec 2004

Ride: AU XR8

Location: Wollongong
NSW, Australia

You will need to have the Unichip re-tuned if you swap out your existing ECU for and XR ECU.

If it is that important, cut your loses with the Unichipand sell it on eBay, then get the CAPA Eliminator chip.

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 8 posts ]

Jump to:

Home » Forums » Fordmods Tech » ECU, Fuel System and Tuning Forum

Who is online
Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Mon Dec 30, 2024 5:38 am

All times are UTC + 11 hours