|
smo el |
|
|||
|
howdy all
Im just getting my car back on the road after it has been dismantaled for the past 18months. I've had the dash out and disconected all the wiring in the engine bay, now i've put it all back together and im getting nothing, no noises or lights in the dash. All the fuses seem fine, im asuming i've not connected something properly but i was told that the computer might be dead after not having power for so long. Any ideas on where i should start looking for the problem. Cheers Simo
_________________ VNOMIS |
|||
Top | |
xr6eat 50 |
|
|||
|
Haveing no power to the ecu for a long period should not do anything, it is probable a wire somewhere. You did put the earth back on for the ecu? I would be going over your wiring again with a multimeter to look for continuity and where exactly you have got power too! We have had a ecu unplugged on the floor of a car for a year and a half and when it all went back together, no problems it is still in the car now three years later. Good luck
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
Top | |
smo el |
|
|||
|
cheers
Thats what i thought, good to hear from people who know though. Thanks simo
_________________ VNOMIS |
|||
Top | |
madeaspack |
|
||
|
does the battery have good charge in it?
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 20 guests |