Fordmods Logo

o2 sensors 

 

Page 1 of 2 [ 19 posts ] Go to page 1, 2  Next

 
 Post subject: o2 sensors
Posted: Tue Aug 08, 2006 2:54 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

hey everyone. im kinda new to these o2 sensors....the only thing i dunno about O2 sensors is the brand name. i found a Bosch O2 sensor for 55 bux and then 5 bux delivery so 60 in total. then there is some other one for 70.....and what about NTK? dunno which one is better but im going to guess bosch are betteR?

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 3:29 am 
Technical Contributor
Offline
User avatar

Posts: 2799

Joined: 6th Nov 2004

Gallery: 7 images

Ride: Falcon

Location: Sydney
NSW, Australia

Bosch's are stock, and its basically as simple as the fact that they work. If it works, why bother trying something else? Not like it's a performance gain.

So, stick with Bosch's, its a good brand.

Is there a reason why you're changing it?


Cheers

 

_________________

;++JustForDimSim++;

Cheap, fast and reliable.. choose 2.

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 10:42 am 
Smokin em up
Offline

Age: 64

Posts: 213

Joined: 6th Nov 2004

Ride: Falcon RTV

Location: Maryborough
QLD, Australia

If it from the same guy off EBay, then its ok.I brought one off him a couple of months ago
Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 1:00 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

justfordima wrote:
Bosch's are stock, and its basically as simple as the fact that they work. If it works, why bother trying something else? Not like it's a performance gain.

So, stick with Bosch's, its a good brand.

Is there a reason why you're changing it?


Cheers


mines gone...and i just need a new one. =D so i just bought the bosch one off ebay. he was cheaper then the others. cheers though dima =D

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 1:09 pm 
Technical Contributor
Offline
User avatar

Posts: 2799

Joined: 6th Nov 2004

Gallery: 7 images

Ride: Falcon

Location: Sydney
NSW, Australia

No worries.. good choice :wink:


Cheers

 

_________________

;++JustForDimSim++;

Cheap, fast and reliable.. choose 2.

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 3:28 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 3737

Joined: 22nd May 2006

Ride: BF F6 Tornado - #0077

Location: Bendigo
VIC, Australia

just go stock from ford. some sensors have preheaters in them and other wierd s**t

 

_________________

** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html

F6 Tornado 2006 Build

Is it about sex? The engine in my car? Or a cure for cancer?
No?

Then f**k off

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 4:58 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 845

Joined: 6th Mar 2005

Gallery: 1 images

Ride: Mini Cooper S Supercharged

Location: Sydney
NSW, Australia

fiftyone wrote:
just go stock from ford. some sensors have preheaters in them and other wierd s**t


Arent they the Wideband's?
Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 9:49 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 886

Joined: 17th Aug 2005

Gallery: 24 images

Ride: VZ SS 6Ltr ute, Honda VFR800

Location: Melbourne
VIC, Australia

Quote:
Arent they the Wideband's?


No, the stock ford ones are narrow band.

 

_________________

My Cars
2006 VZ SS cammed 6Ltr ute 295rwkW
2004 BA XR6T - 290rwkW 12.5@113mph ( SOLD )
1996 EFII Fairmont - 130rwkW 15.5@91mph ( SOLD )

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 9:53 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2832

Joined: 7th Nov 2004

Gallery: 4 images

Ride: Lincoln LS, MKII Escort, ED

Location: geelong
VIC, Australia

all the ones for our falcons will be the 3 wire heated ones

 

_________________

Because i can.

Top
 Profile  
 
 
Posted: Tue Aug 08, 2006 9:56 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

JOSE wrote:
all the ones for our falcons will be the 3 wire heated ones


I bought the one with 3 wires. so yeah should be fine and the guy said it was a straight fit.

whats the difference between wide and narrow band?

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Wed Aug 09, 2006 4:00 am 
Technical Contributor
Offline
User avatar

Posts: 2799

Joined: 6th Nov 2004

Gallery: 7 images

Ride: Falcon

Location: Sydney
NSW, Australia

...long explanation cut short wide band (normally 5 wire or 6 wire) allow you to pretty accurately measure air to fuel ratio.. 0-5V they range, and give you an exact indication of air vs fuel mixture. Narrow band oxygen sensors basically show >0.5V for rich and <0.5V for lean..

Its a bit more copmlex than that, but thats basically what the difference is.

And before someone asks, you can't just put a wideband on replacing the old narrowband, and think you'll have better efficiency or power or something. Firstly it won't work with the stock ECU (unless you get a wideband controller with a narrowband output), and secondly the sensors aren't worth much, but the controllers are. And unless you're tuning, you don't really need it. Unless you like to keep an eye on things.

Cheers

 

_________________

;++JustForDimSim++;

Cheap, fast and reliable.. choose 2.

Top
 Profile  
 
 
Posted: Wed Aug 09, 2006 9:21 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

justfordima wrote:
...long explanation cut short wide band (normally 5 wire or 6 wire) allow you to pretty accurately measure air to fuel ratio.. 0-5V they range, and give you an exact indication of air vs fuel mixture. Narrow band oxygen sensors basically show >0.5V for rich and <0.5V for lean..

Its a bit more copmlex than that, but thats basically what the difference is.

And before someone asks, you can't just put a wideband on replacing the old narrowband, and think you'll have better efficiency or power or something. Firstly it won't work with the stock ECU (unless you get a wideband controller with a narrowband output), and secondly the sensors aren't worth much, but the controllers are. And unless you're tuning, you don't really need it. Unless you like to keep an eye on things.

Cheers


thanks dima =D i shall try and remember all this info.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Wed Aug 09, 2006 11:51 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 845

Joined: 6th Mar 2005

Gallery: 1 images

Ride: Mini Cooper S Supercharged

Location: Sydney
NSW, Australia

Mr.Kiss wrote:
Quote:
Arent they the Wideband's?


No, the stock ford ones are narrow band.


Yea, I know that. Sorry, I should have been more specific.

fiftyone wrote:
just go stock from ford. some sensors have preheaters in them and other wierd s**t


I was just asking about the pre heated one that he was commenting on.

My bad!
Top
 Profile  
 
 
Posted: Wed Aug 09, 2006 1:10 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

NTK is a sub company of NGK (as the spark plug brand).
Top
 Profile  
 
 
 Post subject: o2 sensonr
Posted: Wed Aug 09, 2006 7:17 pm 
Parts Gopher
Offline

Age: 42

Posts: 50

Joined: 2nd Jul 2006

Ride: Hiace Van

Location: Adelaide
SA, Australia

how did you know your o2 sensor was rooted?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 19 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 3:11 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names