|
| Shifteh |
|
||
|
hi ,basically want to obselete keybarrel , run push button start
does anybody know what i will have to do??
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| phil545 |
|
|||
|
Hey mate
I reckon have a read of this and chat with our forum sponsor FTG, they should be able to help you out ferntree-gully-auto-salvage-f24/e-series-au-starter-buttons-t73351.html
_________________ I hate arriving at my destination as then I have to get out of my car! |
|||
| Top | |
|||
| low_ryda |
|
|||
|
if you obsolete the key barrel you will also need to remove the steering lock, install an accessories and ignition switch, then run a push button starter. and hopefully you have an imobilser. not sure how it works with coded keys either.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
should be ok on the E series as they dont run a transponder in the key!
leave the damn barrel in there this way you have the steering lock! if u want to go like the toyos where u can just enter the car and then hit the button to start as in no key etc not a chance! way to much money involved! easy way to set up push button start is to run a relay use the relay to trigger the starter and a button on the relay need to find the wires under the dash i did this on my AUXR6 and worked awesome
_________________ RIP SCOTT |
|||
| Top | |
|||
| low_ryda |
|
|||
|
worked fine in my ea to but i kept forgetting to unlock the steering due to not needing keys lol
 hence my predicament.disco franks option is the simplest. except i just picked up the standard starter relay and used that.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
Google Gaurd Dawg keyless ignition.
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Johnny C |
|
||
|
I had a pushbutton installed into my old EF XR8, just removed the starter wire from the barrel and ran it through the buitton instead.
This way you still need the key for security reasons. And not to mention its the way ford do it. In a way... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
