|
| tsopanos |
|
||
|
I've searched through the doco pages and the forums but can't seem to find any comprehensive info on removing injectors....
Is any info available on this?? thanks |
||
| Top | |
||
| Andrew J |
|
|||
|
On ani6, i think theres 3 (or 4) 10mm bolts that you undo, which removes the fuel rail. Fuel goes everywhere, but thats ok
 Unclip the injector wires, and then the injectors just lift out? Just got to make sure that when putting them back in the o rings are still intact. Smear a bit of something on the o rings when inserting them so you dont tear them, and they'll slide in easy. Just make sure everythig goes on and off smoothly.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| Benji |
|
|||
|
Yeah like he said, they might require a bit of force, just wiggle them around a bit. Just use some saliva to lube the O rings so they go in nice and easy.
Ben |
|||
| Top | |
|||
| glenneaux |
|
||
|
To stop the fuel "pissing out" everywhere run the car and pull the fuel pump relay or disconnect it somehow.. engine will splutter and die. bam no fuel pressure in the rail
|
||
| Top | |
||
| Xplodefalcon |
|
||
|
when i swapped my injectors you could tell the one that spilt the o ring, by the squirt of fuel that went every where.
on that note, what are the biggest injectors (standard falcon) out there?
_________________ 5spd conversion, extac 2 1/2 mandrell bend, 2.92lsd, kings lowered. |
||
| Top | |
||
| fordman351 |
|
|||
|
glenneaux wrote: To stop the fuel "pissing out" everywhere run the car and pull the fuel pump relay or disconnect it somehow.. engine will splutter and die. bam no fuel pressure in the rail
While the car is running (not in an enclosed area aduh!) get into the boot, undo the round panel covering the fuel pump/sender unit and undo the 'big' plug and wait for the car to die i 'spose  .
|
|||
| Top | |
|||
| wardy0 |
|
||
|
you may also have to remove the throttle body to get the fuel rail out.
_________________ i cant be bothered thinking of something to write here |
||
| Top | |
||
| WagonDad |
|
|||
|
Had to remove the throttle body when I did mine, thought I'd get away with it but physically couldnt get it past the throttle body.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
