|
| 400kwgtr |
|
||
|
does anyone know how to remove that darn big black plastic ring that i have to get off in order to change the fuel pump? i have got the steel clamp off but the other ring wont budge. i assume that it screws off? cheers
|
||
| Top | |
||
| EDXR8 |
|
|||
|
Yeah it screws off and you are suppose to have a special tool to do it, but I have done it many times with just a mallet and large flat head screwdriver. Place the screwdriver on the ribs on the ring and then hit it with the mallet (normal anticlockwise). It may take a bit to get it moving but just keep bashing away
|
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
Yes it does screw off '' i made up a tool to do it . get a flat bit of steel a bit longer than the plastic bit . bend the tow ends over. cut some slots init with grinder .and weld a old socet on it then but a socet stiffbar and turn the sucker off.
|
||
| Top | |
||
| Disco Frank |
|
|||
|
ummm datamine had scan of the tool
it is on here too !
_________________ RIP SCOTT |
|||
| Top | |
|||
| phongus |
|
|||
|
i used a mallet and flat screwdriver too. took a fair effort to get it off. bash away anti clockwise direction and it should come off. but make sure when u get it off replace the black rubber O ring or else ur petrol might leak. cost u about 30 bux to replace and its worth the 30 bux.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| bparnham_302 |
|
||
|
yeah i tryed to do that with a screw driver and mallet and i bashed it for about an hour wouldnt come of so i had to break it of and go to wrekers and get a new one so i hope u guys got more patience then i do LOL
_________________ Anything with enough power to hurt myself
|
||
| Top | |
||
| phongus |
|
|||
|
bparnham_302 wrote: yeah i tryed to do that with a screw driver and mallet and i bashed it for about an hour wouldnt come of so i had to break it of and go to wrekers and get a new one so i hope u guys got more patience then i do LOL
ROFL ur cool. its not a bad feeling since u realise that there are parts all over the place for a car like the falcon for cheap =D
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| bparnham_302 |
|
||
|
yeah good old wrekers i should have a gold card there for sure by now
_________________ Anything with enough power to hurt myself
|
||
| Top | |
||
| R.S.R. 54 |
|
||
|
They are a bugger to get loose as the o ring holds
on. either use a block of wood and a hammer , but if you can get to either Super cheap or Repco you could buy the correct tool for around $ 30 . I found the tool works great as I had a sticky pump only 6 months after putting the first one in. removed it in about 5 mins not 30 mins.
_________________ R.S.Racing
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
