|
| frankieh |
|
|||
|
How cool would it be to get scannerpro http://scannerpro.net/
working with ECC V ECU's.. the EL dash can get the info.. why does that not mean it can work with scannerpro? |
|||
| Top | |
|||
| Masier |
|
||
|
off the ecu off the ute
eec-iv 5dac 95da-12a650-ac xh II 5 speed manual is what it's in. |
||
| Top | |
||
| snap0964 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Any ideas which map to start playing with for a xh ute?? I want to tweak it for LPG (it's a eec iv) will pull the computer out tomorrow to see what it is. All XH's are EEC V.{USERNAME} wrote: off the ecu off the ute It'll be EEC V. The EL Tickford LPG ECU has EEC IV on it's sticker, but again, it's EEC V.
eec-iv 5dac 95da-12a650-ac xh II 5 speed manual is what it's in. I think it's because the true EEC V ECU's should have 104 pins (e.g. EF/EL V8's), where the XH and EL I6's have 60 pins.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| xpnutter |
|
||
|
hey matey just wondering if you could help me out, are you able to retune the eb series one ecu, what ive done is jammed a ed engine with turbo running 10 pound boost into an 1965 falcon, or would it be better to go el ecu an get that retuned thanks
|
||
| Top | |
||
| DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
Is there any reason this wont work with EEC-IV?? All the hardward on the moates site says EEC-IV/EEC-V??
Is there any reason i cant tune an EA ECU? Cheers David
_________________ If you're not driving a manual, you are only steering... |
|||
| Top | |
|||
| Jaysen |
|
|||
|
All Aussie EEC's up to the AU were EECIV, and the EECV's were actually 4 and a halves, 256 vs 56k bins.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
A small update: i received my first sample of the locally built J3 chips and hope to test it this weekend. It can switch up to 8 tunes!
To answer the questions... {USERNAME} wrote: hey matey just wondering if you could help me out, are you able to retune the eb series one ecu, what ive done is jammed a ed engine with turbo running 10 pound boost into an 1965 falcon, or would it be better to go el ecu an get that retuned thanks an EL ECU will do the trick. will be very easy to get it running. {USERNAME} wrote: Is there any reason this wont work with EEC-IV?? All the hardward on the moates site says EEC-IV/EEC-V??
Is there any reason i cant tune an EA ECU? Cheers David if you want to disassemble the binary of an EA ECU to produce a definition, the hardware and software will work. if not, plug in an EL ECU as suggested. they are cheap and it works already. why the stupid question? its already been answered!
_________________ {DESCRIPTION} - {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION} and more! |
|||
| Top | |
|||
| DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
Cheers for the reply.
the only reason im not running an EL ECU in my EA is because it doesnt have smart-lock. Also, i have a manual EA, with an EB series 1 non-smartlock manual ECU. David.
_________________ If you're not driving a manual, you are only steering... |
|||
| Top | |
|||
| frankieh |
|
|||
|
I have an EL ECU running my ED motor with log manifold and it hunts a tiny bit at idle, but other than that it is better than the original for low end torque....
Once it's all ready, I'll be putting the blown EL motor in, BBM and all (though the bbm switch will be locked no doubt) and I'll be trying a modified Xr6 bin as detailed by Galapogos01 (who really should still make a tute for all the steps he took to fix his hunting problem including everything from plugging in the hardware to editing the table with lots of screenshots..  )
DJ Brown, I didn't have smartlock either.. so I picked up a smartlock bypass for 80 bucks on ebay.. works a treat. |
|||
| Top | |
|||
| Jaysen |
|
|||
|
problem is where would you start when sorting probs.
Here is your first step, plug in EMU, Ostrich, Pull dump, go to 0X 22000 and start from there, oh sorry true EEC-IV is 0X 2000, start building your def file.........6 months at least you have something that kinda resembles a GUI tuning tool.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| frankieh |
|
|||
|
Jaysen,
I've already got the EL XR6 image from here: http://www.techcore.com.au/eec/ And a def file also.. started by setting the scalars as I saw fit.. but the tables are a little more complex and I don't want to get it wrong. Since falcons run rich most of the time anyway and I've got a rising rate reg and Walbro GS342 pump.. I probably don't have to change much of anything.. will get the AFR checked when it's done and find out what tables need adjusting. |
|||
| Top | |
|||
| gogetta |
|
|||
|
{USERNAME} wrote: A small update: i received my first sample of the locally built J3 chips and hope to test it this weekend. It can switch up to 8 tunes!
how does it work on the car??? how do u change between the tunes??? when will u have them for sale? and how much....will be really interested in buying one off u
_________________ |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
{USERNAME} wrote: I probably don't have to change much of anything..
will get the AFR checked when it's done and find out what tables need adjusting. correct. we should stat a seperate thread for tuning, this one is about sharing the definitions and chips. i imagine a programmed chip will be around $120.
_________________ {DESCRIPTION} - {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION} and more! |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Thanks to Hybrid34, I now have an EL XR6 Manual bin file. This was probably the most requested of all. They fetch some pretty ridiculous prices!!! We can now turn any EL ecu into an EL XR6 Manual ecu for the cost of a J3 chip.
On the J3 chips themselves, my Australian supplier has sent me a sample unit. I am having a little trouble programming it as my hardware is from the US, but once we have this hiccup sorted out we will be able to offer locally built chips cheaper than the US sourced ones (which currently over $100 with shipping). Cheers, Jason
_________________ {DESCRIPTION} - {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION} and more! |
|||
| Top | |
|||
| FPV_GTp |
|
||
|
galapogos01 , nice write up , keep up the good work
cheers
_________________ WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
