|
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
No. But seeing that a T.I. Performance chip and programmer pack will cost less than you can sell the Chiptorque for, and that you can read the tune off the Chiptorque... well, you should be able to work out the rest!
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| L.D-50 |
|
||
Age: 43 Posts: 34 Joined: 7th Apr 2006 Ride: AU II XR8 ute but with lucky 220 Location: north coast |
Hey mate can you tune Au xr8's with a j3 chip and your know how?
|
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Yes we can. Tuning via mail-order can be difficult if you have changed the MAF, however a dealer should be able to sort this out easily on the dyno or there's the DIY option. Check the site for more info or shoot me a PM.
Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Hey guys,
Few small updates to the website. A few more dealers, along with a few new cars in the Owners Gallery. If you have one of our chips and your car isn't listed make sure you add it yourself and get in touch for a free sticker! Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| L.D-50 |
|
||
Age: 43 Posts: 34 Joined: 7th Apr 2006 Ride: AU II XR8 ute but with lucky 220 Location: north coast |
galapogos01 wrote: Hey guys, Few small updates to the website. A few more dealers, along with a few new cars in the Owners Gallery. If you have one of our chips and your car isn't listed make sure you add it yourself and get in touch for a free sticker! Cheers, Jason Hey mate i noticed no Au's on the website, how much to be a guinea pig? and have a custom tune done get it done write and you can whack a big a** sticker where ya want too lol |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
We have done a few AUs, but the owners haven't added their cars to the site for whatever reasons. Pricing is the same for all models, just shoot me a PM if you're keen.
Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Just a quick note to let you know that TechEdge have launched their updated 2J2 Wideband Controller. With similar features and an updated cabling system, these are even easier to install than the 2J1. See the product page for more info. Now in stock!
Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| _LowKey_ |
|
|||
|
Hey mate im converting my 98 EL fairmont ghia to manual and was wondering how much for a j3 delivered to nz, with the appropriate map for a manual hyrbrid engine, guesing itll be same map as el xr6 manual? And do these just plug into side of ecu?
_________________ 98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc. |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Hi mate,
A pre-programmed chip to suit will set you back $130AU inc regular post to NZ. Just order on the site when you're ready. Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| _LowKey_ |
|
|||
|
galapogos01 wrote: Hi mate, A pre-programmed chip to suit will set you back $130AU inc regular post to NZ. Just order on the site when you're ready. Cheers, Jason Sweet as, also by using a chip will that mean i wont have to do the resistor trick and inhibitor switch? And it just plugs into top of ecu i guess?
_________________ 98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc. |
|||
| Top | |
|||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Yes, and Yes. There is an instruction guide on the website and linked in this thread if you want to see the steps involved. It takes about 10 minutes maximum.
Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| fatblak6 |
|
||
|
gday, how much would a pre-tuned chip cost, im in nz. have got xg xr6 5speed manual running extractors, 2.5" exhaust and pod. and am also getting a cam regrind which will have simmilar profile to a wade 977b.
_________________ FORDMODS |
||
| Top | |
||
| _LowKey_ |
|
|||
|
fatblak6 wrote: gday, how much would a pre-tuned chip cost, im in nz. have got xg xr6 5speed manual running extractors, 2.5" exhaust and pod. and am also getting a cam regrind which will have simmilar profile to a wade 977b. you might need a custom one with cam g. pre programmed just runs stock programming, same as what your ecu will be running now i think
_________________ 98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc. |
|||
| Top | |
|||
| fatblak6 |
|
||
|
_LowKey_ wrote: fatblak6 wrote: gday, how much would a pre-tuned chip cost, im in nz. have got xg xr6 5speed manual running extractors, 2.5" exhaust and pod. and am also getting a cam regrind which will have simmilar profile to a wade 977b. you might need a custom one with cam g. pre programmed just runs stock programming, same as what your ecu will be running now i think yea pre programmed custom one g. duno bout all this ecu jumbo. might get one with base map an see if cheers will do the tuning. no one in nz does a chip for pre ef apprantly so need to get el ecu.
_________________ FORDMODS |
||
| Top | |
||
| _LowKey_ |
|
|||
|
fatblak6 wrote: _LowKey_ wrote: fatblak6 wrote: gday, how much would a pre-tuned chip cost, im in nz. have got xg xr6 5speed manual running extractors, 2.5" exhaust and pod. and am also getting a cam regrind which will have simmilar profile to a wade 977b. you might need a custom one with cam g. pre programmed just runs stock programming, same as what your ecu will be running now i think yea pre programmed custom one g. duno bout all this ecu jumbo. might get one with base map an see if cheers will do the tuning. no one in nz does a chip for pre ef apprantly so need to get el ecu. Yeah its all new to me aswell, have a read up on the website http://www.tiperformance.com.au/products.html Tells you all about them... We might have to buy a tuner and get the NZ scene under way haha
_________________ 98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
